HARVEY TOOL
M5-0.80 - 0.1200" CUTTER DIA X 0.3125 (5/16)" LOC - 3 FL, 819628
- SKU:
- 819628
- Shipping:
- Calculated at Checkout
Description
0.1200" CUTTER DIA X 0.3125 (5/16)" LENGTH OF CUT CARBIDE MULTI-FORM M5-0.80 THREAD MILLING CUTTER COOLANT THROUGH, 3 FLUTES
View AllClose
Additional Information
Cutter Diameter: |
0.1200" |
Length of Cut: |
0.3125" (5/16) |
Overall Length: |
2.0000" (2) |
Included Angle: |
60 |
Flutes: |
3" |
Size: |
M5-0.80 |
Shank Diameter: |
0.1250" (1/8) |
Metric: |
N |
Coating: |
UN |
Center Cutting: |
N |
Chip Breaker: |
N |
Double Ended: |
N |
Weldon Flat: |
N |
Coolant Through: |
Y |
Related Products
Related Products
M5-0.80 - 0.1200" CUTTER DIA X 0.3125 (5/16)" LOC - 3 FL - ALTIN COATED, 819628-C3
HARVEY TOOL
$139.20
0.1200" CUTTER DIA X 0.3125 (5/16)" LENGTH OF CUT CARBIDE MULTI-FORM M5-0.80 THREAD MILLING CUTTER COOLANT THROUGH, 3 FLUTES, ALTIN COATED
819628-C3
M5-0.80 - 0.1200" CUTTER DIA X 0.3120 (5/16)" LOC - 3 FL, 16911
HARVEY TOOL
$126.90
0.1200" CUTTER DIA X 0.3120 (5/16)" LENGTH OF CUT CARBIDE MULTI-FORM M5-0.80 THREAD MILLING CUTTER, 3 FLUTES
16911
M5-0.80 - 0.1200" CUTTER DIA X 0.3120 (5/16)" LOC - 3 FL - ALTIN COATED, 16911-C3
HARVEY TOOL
$132.40
0.1200" CUTTER DIA X 0.3120 (5/16)" LENGTH OF CUT CARBIDE MULTI-FORM M5-0.80 THREAD MILLING CUTTER, 3 FLUTES, ALTIN COATED
16911-C3
M5-0.80 - 0.1550" CUTTER DIA X 0.5040" LOC - 3 FL, 842911
HARVEY TOOL
$150.60
0.1550" CUTTER DIA X 0.5040" LENGTH OF CUT CARBIDE MULTI-FORM M5-0.80 THREAD MILLING CUTTER, 3 FLUTES
842911
10-32 - 0.1200" Cutter DIA x 0.313" (5/16) LOC - 3 FL
MICRO 100
$158.40
0.1200" Cutter DIA x 0.313" (5/16) Length of Cut Carbide Multi-Form 10-32 Thread Milling Cutter, 3 Flutes
TM-190-32
3 FL - 0.3125 (5/16)" CUTTER DIA X 1.0000 (1)" LOC, 942320
HARVEY TOOL
$42.70
0.3125 (5/16)" CUTTER DIA X 1.0000 (1)" LENGTH OF CUT CARBIDE SQUARE END MILL FOR ALUMINUM ALLOYS, 3 FLUTES
942320
3 FL - 0.0200" (.5 mm) Cutter DIA x 0.1200" LOC
HARVEY TOOL
$45.40
0.0200" (.5 mm) Cutter DIA x 0.1200" Length of Cut Carbide Ball End Mill, 3 Flutes
877120
Out of stock
3 FL - 0.3125" (5/16) CUTTER DIA X 0.813" LOC ,ARM-312-3
MICRO 100
$38.00
0.3125" (5/16) CUTTER DIA X 0.813" LENGTH OF CUT CARBIDE SQUARE END MILL FOR ALUMINUM ALLOYS, 3 FLUTES,ARM-312-3
ARM-312-3
3 FL - 0.3125" (5/16) Cutter DIA x 0.8125" (13/16) LOC - Uncoated
TITAN USA
Now:
$35.51
Was:
$39.45
0.3125" (5/16) Cutter DIA x 0.8125" (13/16) Length of Cut Carbide Square End Mill for Aluminum Chipbreaker, 3 Flutes, Uncoated
TC67210