HARVEY TOOL
0.1250" (1/8) Shank DIA x 60° included - 716530
- SKU:
- 716530
- Shipping:
- Calculated at Checkout
Additional Information
Length of Cut: |
0.1080" |
Overall Length: |
2.5000" (2-1/2) |
Angle per Side: |
30 |
Included Angle: |
60 |
Shank Diameter: |
0.1250" (1/8) |
Metric: |
N |
Coating: |
UN |
Related Products
Related Products
0.1250" (1/8) Shank DIA x 60° included
MICRO 100
$23.00
0.1250" (1/8) Shank DIA x 60° included Carbide Tipped Engraver
RSC-125-13
0.1250 (1/8)" SHANK DIA X 60° INCLUDED, 842830
HARVEY TOOL
$28.70
0.1250 (1/8)" SHANK DIA X 60° INCLUDED CARBIDE PYRAMID POINT ENGRAVER
842830
0.1250" (1/8) Shank DIA x 60° included DE
MICRO 100
$31.80
0.1250" (1/8) Shank DIA x 60° included Carbide Tipped Engraver DE
RSC-125-23
0.1250" (1/8) Shank DIA x 60° included - AlTiN Coated
MICRO 100
$22.75
0.1250" (1/8) Shank DIA x 60° included Carbide Tipped Engraver, AlTiN Coated
RSC-125-1X
0.1250 (1/8)" SHANK DIA X 60° INCLUDED - 1 FL, 30010
HARVEY TOOL
$16.60
0.1250 (1/8)" SHANK DIA X 60° INCLUDED CARBIDE POINTED ENGRAVER, 1 FLUTE
30010
0.1250 (1/8)" SHANK DIA X 60° INCLUDED - 1 FL, 30410
HARVEY TOOL
$27.70
0.1250 (1/8)" SHANK DIA X 60° INCLUDED CARBIDE POINTED ENGRAVER, 1 FLUTE
30410
0.1250 (1/8)" SHANK DIA X 60° INCLUDED - 2 FL, 905708
HARVEY TOOL
$20.60
0.1250 (1/8)" SHANK DIA X 60° INCLUDED CARBIDE MARKING CUTTER, 2 FLUTES
905708
0.1250 (1/8)" SHANK DIA X 60° INCLUDED - 2 FL, 993230
HARVEY TOOL
$20.60
0.1250 (1/8)" SHANK DIA X 60° INCLUDED CARBIDE MARKING CUTTER FOR NON-FERROUS, 2 FLUTES
993230