HARVEY TOOL
0.0550" (1.4 mm) Cutter DIA x 0.0150" (1/64) Radius x 24° included - 2 FL - AlTiN Coated
- SKU:
- 715207-C3
- Shipping:
- Calculated at Checkout
Additional Information
Neck Diameter: |
0.0390" (1 mm) |
Length of Cut: |
0.0540" |
Overall Length: |
1.5000" (1-1/2) |
Corner Radius: |
0.0150" (1/64) |
Angle per Side: |
12 |
Included Angle: |
24 |
Flutes: |
2 |
O Ring X Section: |
0.0700" |
Shank Diameter: |
0.1250" (1/8) |
Metric: |
N |
Coating: |
C3 |
Related Products
Related Products
0.0550" (1.4 mm) Cutter DIA x 0.0150" (1/64) Radius x 24° included - 2 FL - TiB2 Coated
HARVEY TOOL
$87.00
715207-C8
0.0550 (1.4 MM)" CUTTER DIA X 0.0150 (1/64)" RADIUS X 48° INCLUDED - 2 FL - ALTIN COATED, 23907-C3
HARVEY TOOL
$84.20
0.0550 (1.4 MM)" CUTTER DIA X 0.0150 (1/64)" RADIUS X 48° INCLUDED CARBIDE DOVETAIL CUTTER WITHOUT DROP HOLE ALLOWANCE, 2 FLUTES, ALTIN COATED
23907-C3
0.0550 (1.4 MM)" CUTTER DIA X 0.0150 (1/64)" RADIUS X 48° INCLUDED - 2 FL, 23907
HARVEY TOOL
$78.70
0.0550 (1.4 MM)" CUTTER DIA X 0.0150 (1/64)" RADIUS X 48° INCLUDED CARBIDE DOVETAIL CUTTER WITHOUT DROP HOLE ALLOWANCE, 2 FLUTES
23907
0.0550 (1.4 MM)" CUTTER DIA X 0.0150 (1/64)" RADIUS X 48° INCLUDED - 2 FL - TIB2 COATED, 23907-C8
HARVEY TOOL
$86.70
0.0550 (1.4 MM)" CUTTER DIA X 0.0150 (1/64)" RADIUS X 48° INCLUDED CARBIDE DOVETAIL CUTTER WITHOUT DROP HOLE ALLOWANCE, 2 FLUTES, TIB2 COATED
23907-C8
0.0830" (2.1 mm) Cutter DIA x 0.0150" (1/64) Radius x 24° included - 2 FL - AlTiN Coated
HARVEY TOOL
$85.40
715214-C3
4 FL - 0.0550 (1.4 MM)" CUTTER DIA X 0.0150 (1/64)" RADIUS X 0.1650" LOC - ALTIN COATED, 28155-C3
HARVEY TOOL
$31.20
0.0550 (1.4 MM)" CUTTER DIA X 0.0150 (1/64)" RADIUS X 0.1650" LENGTH OF CUT CARBIDE CORNER RADIUS END MILL, 4 FLUTES, ALTIN COATED
28155-C3
4 FL - 0.0550 (1.4 MM)" CUTTER DIA X 0.0150 (1/64)" RADIUS X 0.0830" LOC - ALTIN COATED, 997955-C3
HARVEY TOOL
$31.20
0.0550 (1.4 MM)" CUTTER DIA X 0.0150 (1/64)" RADIUS X 0.0830" LENGTH OF CUT CARBIDE CORNER RADIUS END MILL, 4 FLUTES, ALTIN COATED
997955-C3
3 FL - 0.0550 (1.4 MM)" CUTTER DIA X 0.0150 (1/64)" RADIUS X 0.0650" LOC - ALTIN COATED, 56510-C3
HARVEY TOOL
$34.10
0.0550 (1.4 MM)" CUTTER DIA X 0.0150 (1/64)" RADIUS X 0.0650" LENGTH OF CUT CARBIDE O-RING SLOTTING END MILL, 3 FLUTES, ALTIN COATED
56510-C3