MICRO 100
#7-16 - 0.7500" (3/4) Cutter DIA - 6 FL
- SKU:
- TM-750
- MPN:
- TM-750
- Availability:
- 20
- Shipping:
- Calculated at Checkout
Description
0.7500" (3/4) Cutter DIA Carbide Single Form - Reduced Shank #7-16 Thread Milling Cutter, 6 Flutes
View AllClose
Additional Information
Cutter Diameter: |
0.7500" (3/4) |
Coating: |
UN |
Flutes: |
6 |
Length of Cut: |
0.156" (5/32) |
Shank Diameter: |
0.3750" (3/8) |
Flat Width: |
0.004" |
Overall Length: |
2.65" |
Thread Size: |
7-16 |
Metric: |
N |
Related Products
Related Products
#7-16 - 0.7500" (3/4) Cutter DIA - 6 FL - AlTiN Coated
MICRO 100
$140.05
0.7500" (3/4) Cutter DIA Carbide Single Form - Reduced Shank #7-16 Thread Milling Cutter, 6 Flutes, AlTiN Coated
TM-750X
#7/16 - 0.3400" CUTTER DIA X 0.7500 (3/4)" REACH - 4 FL, 71065
HARVEY TOOL
$122.20
0.3400" CUTTER DIA X 0.7500 (3/4)" REACH CARBIDE SINGLE FORM #7/16 THREAD MILLING CUTTER, 4 FLUTES
71065
7/16-14 - 0.3050" CUTTER DIA X 0.7500 (3/4)" LOC - 4 FL, 70074
HARVEY TOOL
$203.30
0.3050" CUTTER DIA X 0.7500 (3/4)" LENGTH OF CUT CARBIDE MULTI-FORM 7/16-14 THREAD MILLING CUTTER, 4 FLUTES
70074
7/16-14 - 0.3050" CUTTER DIA X 0.7500 (3/4)" LOC - 4 FL, 17374
HARVEY TOOL
$218.10
0.3050" CUTTER DIA X 0.7500 (3/4)" LENGTH OF CUT CARBIDE MULTI-FORM 7/16-14 THREAD MILLING CUTTER COOLANT THROUGH, 4 FLUTES
17374
4 FL - 0.1875 (3/16)" CUTTER DIA X 0.7500 (3/4)" LOC, 888512
HARVEY TOOL
$27.60
0.1875 (3/16)" CUTTER DIA X 0.7500 (3/4)" LENGTH OF CUT CARBIDE SQUARE END MILL, 4 FLUTES
888512
4 FL - 0.1875 (3/16)" CUTTER DIA X 0.7500 (3/4)" LOC, 837012
HARVEY TOOL
$31.70
0.1875 (3/16)" CUTTER DIA X 0.7500 (3/4)" LENGTH OF CUT CARBIDE BALL END MILL, 4 FLUTES
837012
1 FL - 0.1875" (3/16) Cutter DIA x 0.7500" (3/4) LOC
HARVEY TOOL
$41.70
0.1875" (3/16) Cutter DIA x 0.7500" (3/4) Length of Cut Carbide Square Downcut End Mill for Plastic, 1 Flute
855912
6 FL - 0.0937" (3/32) Cutter DIA x 0.7500" (3/4) LOC
HARVEY TOOL
$61.60
0.0937" (3/32) Cutter DIA x 0.7500" (3/4) Length of Cut Carbide Square Chipbreaker Cutter, 6 Flutes
751693
3 FL - 0.1875" (3/16) Cutter DIA x 0.7500" (3/4) LOC - Uncoated
TITAN USA
Now:
$30.96
Was:
$34.40
0.1875" (3/16) Cutter DIA x 0.7500" (3/4) Length of Cut Carbide Square End Mill for Aluminum Chipbreaker, 3 Flutes, Uncoated
TC67217