TITAN USA
5 FL - 0.2500" (1/4) Cutter DIA x 0.0100" Radius x 0.7500" (3/4) LOC - Uncoated
- SKU:
- TC63815
- Shipping:
- Calculated at Checkout
Description
0.2500" (1/4) Cutter DIA x 0.0100" Radius x 0.7500" (3/4) Length of Cut Carbide Corner Radius End Mill, 5 Flutes, Uncoated
View AllClose
Additional Information
Coating: |
UNCOATED |
Cutter Diameter: |
0.2500 (1/4) |
Flutes: |
5 |
Length of Cut: |
0.7500 (3/4) |
Shank Diameter: |
0.2500 (1/4) |
Corner Radius: |
0.01 |
Overall Length: |
2.5000 (2-1/2) |
Substrate: |
carbide |
Metric: |
N |
Related Products
Related Products
4 FL - 0.2500 (1/4)" CUTTER DIA X 0.0100" RADIUS X 0.7500 (3/4)" LOC, 36210
HARVEY TOOL
$32.70
0.2500 (1/4)" CUTTER DIA X 0.0100" RADIUS X 0.7500 (3/4)" LENGTH OF CUT CARBIDE CORNER RADIUS END MILL, 4 FLUTES
36210
5 FL - 0.2500" (1/4) Cutter DIA x 0.0300" Radius x 0.7500" (3/4) LOC - Uncoated
TITAN USA
Now:
$22.46
Was:
$24.95
0.2500" (1/4) Cutter DIA x 0.0300" Radius x 0.7500" (3/4) Length of Cut Carbide Corner Radius End Mill, 5 Flutes, Uncoated
TC63817
5 FL - 0.2500" (1/4) Cutter DIA x 0.0100" Radius x 0.7500" (3/4) LOC - AlTiN Coated
TITAN USA
Now:
$28.17
Was:
$31.30
0.2500" (1/4) Cutter DIA x 0.0100" Radius x 0.7500" (3/4) Length of Cut Carbide Corner Radius End Mill, 5 Flutes, AlTiN Coated
TC63915
3 FL - 0.2500 (1/4)" CUTTER DIA X 0.0100" RADIUS X 0.7500 (3/4)" LOC, 50116
HARVEY TOOL
$33.70
0.2500 (1/4)" CUTTER DIA X 0.0100" RADIUS X 0.7500 (3/4)" LENGTH OF CUT CARBIDE CORNER RADIUS END MILL FOR ALUMINUM ALLOYS, 3 FLUTES
50116
3 FL - 0.2500 (1/4)" CUTTER DIA X 0.0100" RADIUS X 0.7500 (3/4)" LOC, 831810
HARVEY TOOL
$32.70
0.2500 (1/4)" CUTTER DIA X 0.0100" RADIUS X 0.7500 (3/4)" LENGTH OF CUT CARBIDE CORNER RADIUS END MILL, 3 FLUTES
831810
3 FL - 0.2500" (1/4) Cutter DIA x 0.0600" Radius x 0.7500" (3/4) LOC - Uncoated
TITAN USA
Now:
$33.89
Was:
$37.65
0.2500" (1/4) Cutter DIA x 0.0600" Radius x 0.7500" (3/4) Length of Cut Carbide Corner Radius End Mill for Aluminum Chipbreaker, 3 Flutes, Uncoated
TC67289
3 FL - 0.2500" (1/4) Cutter DIA x 0.0300" Radius x 0.7500" (3/4) LOC - Uncoated
TITAN USA
Now:
$33.89
Was:
$37.65
0.2500" (1/4) Cutter DIA x 0.0300" Radius x 0.7500" (3/4) Length of Cut Carbide Corner Radius End Mill for Aluminum Chipbreaker, 3 Flutes, Uncoated
TC67288
2 FL - 0.2500 (1/4)" CUTTER DIA X 0.0100" RADIUS X 0.7500 (3/4)" LOC, 55516
HARVEY TOOL
$61.60
0.2500 (1/4)" CUTTER DIA X 0.0100" RADIUS X 0.7500 (3/4)" LENGTH OF CUT CARBIDE CORNER RADIUS END MILL FOR PLASTIC, 2 FLUTES
55516
2 FL - 0.2500 (1/4)" CUTTER DIA X 0.0100" RADIUS X 0.7500 (3/4)" LOC, 47410
HARVEY TOOL
$32.70
0.2500 (1/4)" CUTTER DIA X 0.0100" RADIUS X 0.7500 (3/4)" LENGTH OF CUT CARBIDE CORNER RADIUS END MILL, 2 FLUTES
47410