HARVEY TOOL
4 FL - 0.3750 (3/8)" CUTTER DIA X 1.7500 (1-3/4)" LOC, 12624
- SKU:
- 12624
- Shipping:
- Calculated at Checkout
Description
0.3750 (3/8)" CUTTER DIA X 1.7500 (1-3/4)" LENGTH OF CUT CARBIDE BALL END MILL, 4 FLUTES
View AllClose
Additional Information
Cutter Diameter: |
0.3750" (3/8) |
Length of Cut: |
1.7500" (1-3/4) |
Overall Length: |
4.0000" (4) |
Flutes: |
4" |
LOC Multiple: |
(5x) |
Shank Diameter: |
0.3750" (3/8) |
Metric: |
N |
Coating: |
UN |
Related Products
Related Products
4 FL - 0.3750 (3/8)" CUTTER DIA X 1.7500 (1-3/4)" LOC - ALTIN COATED, 12624-C3
HARVEY TOOL
$81.80
0.3750 (3/8)" CUTTER DIA X 1.7500 (1-3/4)" LENGTH OF CUT CARBIDE BALL END MILL, 4 FLUTES, ALTIN COATED
12624-C3
4 FL - 0.3750 (3/8)" CUTTER DIA X 1.7500 (1-3/4)" LOC, 12524
HARVEY TOOL
$51.90
0.3750 (3/8)" CUTTER DIA X 1.7500 (1-3/4)" LENGTH OF CUT CARBIDE SQUARE END MILL, 4 FLUTES
12524
Out of stock
4 FL - 0.3750" (3/8) Cutter DIA x 1.7500" (1-3/4) LOC - Amorphous Diamond Coated
HARVEY TOOL
$79.00
0.3750" (3/8) Cutter DIA x 1.7500" (1-3/4) Length of Cut Carbide Square End Mill, 4 Flutes, Amorphous Diamond Coated
12524-C4
4 FL - 0.3750 (3/8)" CUTTER DIA X 1.7500 (1-3/4)" LOC - ALTIN COATED, 12524-C3
HARVEY TOOL
$66.50
0.3750 (3/8)" CUTTER DIA X 1.7500 (1-3/4)" LENGTH OF CUT CARBIDE SQUARE END MILL, 4 FLUTES, ALTIN COATED
12524-C3
3 FL - 0.2500 (1/4)" CUTTER DIA X 0.3750 (3/8)" LOC X 1.7500 (1-3/4)" REACH, 934916
HARVEY TOOL
$50.70
0.2500 (1/4)" CUTTER DIA X 0.3750 (3/8)" LENGTH OF CUT X 1.7500 (1-3/4)" REACH CARBIDE SQUARE END MILL, 3 FLUTES
934916
4 FL - 0.0700" Cutter DIA x 0.3750" (3/8) LOC
HARVEY TOOL
$30.10
0.0700" Cutter DIA x 0.3750" (3/8) Length of Cut Carbide Square End Mill, 4 Flutes
834170
3 FL - 0.2500 (1/4)" CUTTER DIA X 0.3750 (3/8)" LOC X 1.7500 (1-3/4)" REACH - ALTIN COATED, 934916-C3
HARVEY TOOL
$60.10
0.2500 (1/4)" CUTTER DIA X 0.3750 (3/8)" LENGTH OF CUT X 1.7500 (1-3/4)" REACH CARBIDE SQUARE END MILL, 3 FLUTES, ALTIN COATED
934916-C3
4 FL - 0.3750" (3/8) Cutter DIA x 3.0000" (3) LOC
HARVEY TOOL
$103.70
0.3750" (3/8) Cutter DIA x 3.0000" (3) Length of Cut Carbide Square End Mill, 4 Flutes
33724
3 FL - 0.7500" (3/4) Cutter DIA x 1.7500" (1-3/4) LOC - Uncoated
TITAN USA
Now:
$171.59
Was:
$190.65
0.7500" (3/4) Cutter DIA x 1.7500" (1-3/4) Length of Cut Carbide Square End Mill for Aluminum Chipbreaker, 3 Flutes, Uncoated
TC67214