HARVEY TOOL
4 FL - 0.2344" (15/64) Cutter DIA x 0.0100" Radius x 0.3550" LOC
- SKU:
- 734210
- Shipping:
- Calculated at Checkout
Description
0.2344" (15/64) Cutter DIA x 0.0100" Radius x 0.3550" Length of Cut Carbide Corner Radius End Mill, 4 Flutes
View AllClose
Additional Information
Cutter Diameter: |
0.2344" (15/64) |
Length of Cut: |
0.3550" |
Overall Length: |
2.5000" (2-1/2) |
Corner Radius: |
0.0100" |
Flutes: |
4" |
LOC Multiple: |
(1.5x) |
Shank Diameter: |
0.2500" (1/4) |
Metric: |
N |
Coating: |
UN |
Related Products
Related Products
4 FL - 0.2344" (15/64) Cutter DIA x 0.0100" Radius x 0.3550" LOC - AlTiN Coated
HARVEY TOOL
$40.50
0.2344" (15/64) Cutter DIA x 0.0100" Radius x 0.3550" Length of Cut Carbide Corner Radius End Mill, 4 Flutes, AlTiN Coated
734210-C3
4 FL - 0.2344 (15/64)" CUTTER DIA X 0.0100" RADIUS X 0.7050" LOC, 863510
HARVEY TOOL
$32.70
0.2344 (15/64)" CUTTER DIA X 0.0100" RADIUS X 0.7050" LENGTH OF CUT CARBIDE CORNER RADIUS END MILL, 4 FLUTES
863510
4 FL - 0.2344" (15/64) Cutter DIA x 0.0400" Radius x 0.7050" LOC
HARVEY TOOL
$33.60
0.2344" (15/64) Cutter DIA x 0.0400" Radius x 0.7050" Length of Cut Carbide Corner Radius End Mill, 4 Flutes
863540
Out of stock
4 FL - 0.2344 (15/64)" CUTTER DIA X 0.0100" RADIUS X 0.7050" LOC - ALTIN COATED, 863510-C3
HARVEY TOOL
$40.70
0.2344 (15/64)" CUTTER DIA X 0.0100" RADIUS X 0.7050" LENGTH OF CUT CARBIDE CORNER RADIUS END MILL, 4 FLUTES, ALTIN COATED
863510-C3
4 FL - 0.2344" (15/64) Cutter DIA x 0.438" LOC
MICRO 100
$27.90
0.2344" (15/64) Cutter DIA x 0.438" Length of Cut Carbide Square End Mill, 4 Flutes
SEM-234-04
4 FL - 0.2344 (15/64)" CUTTER DIA X 0.0300" RADIUS X 0.7050" LOC, 863530
HARVEY TOOL
$32.70
0.2344 (15/64)" CUTTER DIA X 0.0300" RADIUS X 0.7050" LENGTH OF CUT CARBIDE CORNER RADIUS END MILL, 4 FLUTES
863530
4 FL - 0.2344" (15/64) Cutter DIA x 0.0400" Radius x 0.7050" LOC - AlTiN Coated
HARVEY TOOL
$41.60
0.2344" (15/64) Cutter DIA x 0.0400" Radius x 0.7050" Length of Cut Carbide Corner Radius End Mill, 4 Flutes, AlTiN Coated
863540-C3
Out of stock
4 FL - 0.2344" (15/64) Cutter DIA x 0.438" LOC - AlTiN Coated
MICRO 100
$31.35
0.2344" (15/64) Cutter DIA x 0.438" Length of Cut Carbide Square End Mill, 4 Flutes, AlTiN Coated
SEM-234-04X
4 FL - 0.2344 (15/64)" CUTTER DIA X 0.7500 (3/4)" LOC, 74495
HARVEY TOOL
$29.10
0.2344 (15/64)" CUTTER DIA X 0.7500 (3/4)" LENGTH OF CUT CARBIDE BALL END MILL, 4 FLUTES
74495