HARVEY TOOL
4 FL - 0.1250" (1/8) Cutter DIA x 0.7500" (3/4) LOC - AlTiN Coated
- SKU:
- 750308-C3
- Shipping:
- Calculated at Checkout
Description
0.1250" (1/8) Cutter DIA x 0.7500" (3/4) Length of Cut Carbide Ball End Mill, 4 Flutes, AlTiN Coated
View AllClose
Additional Information
Cutter Diameter: |
0.1250" (1/8) |
Length of Cut: |
0.7500" (3/4) |
Overall Length: |
2.5000" (2-1/2) |
Flutes: |
4" |
LOC Multiple: |
(6x) |
Shank Diameter: |
0.1250" (1/8) |
Metric: |
N |
Coating: |
C3 |
Related Products
Related Products
4 FL - 0.1250 (1/8)" CUTTER DIA X 0.7500 (3/4)" LOC - ALTIN COATED, 12508-C3
HARVEY TOOL
$35.10
0.1250 (1/8)" CUTTER DIA X 0.7500 (3/4)" LENGTH OF CUT CARBIDE SQUARE END MILL, 4 FLUTES, ALTIN COATED
12508-C3
4 FL - 0.1250" (1/8) Cutter DIA x 0.0100" Radius x 0.7500" (3/4) LOC - AlTiN Coated
HARVEY TOOL
$37.70
0.1250" (1/8) Cutter DIA x 0.0100" Radius x 0.7500" (3/4) Length of Cut Carbide Corner Radius End Mill, 4 Flutes, AlTiN Coated
733810-C3
3 FL - 0.1250 (1/8)" CUTTER DIA X 0.7500 (3/4)" LOC - ALTIN COATED, 877208-C3
HARVEY TOOL
$36.70
0.1250 (1/8)" CUTTER DIA X 0.7500 (3/4)" LENGTH OF CUT CARBIDE BALL END MILL, 3 FLUTES, ALTIN COATED
877208-C3
4 FL - 0.1250" (1/8) Cutter DIA x 0.3750" (3/8) LOC x 0.7500" (3/4) Reach - AlTiN Coated
HARVEY TOOL
$54.00
0.1250" (1/8) Cutter DIA x 0.3750" (3/8) Length of Cut x 0.7500" (3/4) Reach Carbide Ball End Mill, 4 Flutes, AlTiN Coated
805808-C3
3 FL - 0.1250 (1/8)" CUTTER DIA X 0.7500 (3/4)" LOC - ALTIN COATED, 894308-C3
HARVEY TOOL
$33.40
0.1250 (1/8)" CUTTER DIA X 0.7500 (3/4)" LENGTH OF CUT CARBIDE SQUARE END MILL, 3 FLUTES, ALTIN COATED
894308-C3
3 FL - 0.1250" (1/8) Cutter DIA x 0.7500" (3/4) LOC - ZrN Coated
TITAN USA
Now:
$31.37
Was:
$34.85
0.1250" (1/8) Cutter DIA x 0.7500" (3/4) Length of Cut Carbide Square End Mill for Aluminum Chipbreaker, 3 Flutes, ZrN Coated
TC67241
4 FL - 0.1250" (1/8) Cutter DIA x 0.7500" (3/4) LOC
HARVEY TOOL
$35.10
0.1250" (1/8) Cutter DIA x 0.7500" (3/4) Length of Cut Carbide Ball End Mill, 4 Flutes
750308
4 FL - 0.1250" (1/8) Cutter DIA x 0.1870" (3/16) LOC x 0.7500" (3/4) Reach - AlTiN Coated
HARVEY TOOL
$44.60
0.1250" (1/8) Cutter DIA x 0.1870" (3/16) Length of Cut x 0.7500" (3/4) Reach Carbide Square End Mill, 4 Flutes, AlTiN Coated
753708-C3
3 FL - 0.1250" (1/8) Cutter DIA x 0.250" (1/4) LOC - AlTiN Coated
MICRO 100
$17.05
0.1250" (1/8) Cutter DIA x 0.250" (1/4) Length of Cut Carbide Square End Mill, 3 Flutes, AlTiN Coated
SEM-125-03X