HARVEY TOOL
4 FL - 0.1250" (1/8) Cutter DIA x 0.7500" (3/4) LOC
- SKU:
- 750308
- Shipping:
- Calculated at Checkout
Description
0.1250" (1/8) Cutter DIA x 0.7500" (3/4) Length of Cut Carbide Ball End Mill, 4 Flutes
View AllClose
Additional Information
Cutter Diameter: |
0.1250" (1/8) |
Length of Cut: |
0.7500" (3/4) |
Overall Length: |
2.5000" (2-1/2) |
Flutes: |
4" |
LOC Multiple: |
(6x) |
Shank Diameter: |
0.1250" (1/8) |
Metric: |
N |
Coating: |
UN |
Related Products
Related Products
4 FL - 0.1250 (1/8)" CUTTER DIA X 0.7500 (3/4)" LOC, 12508
HARVEY TOOL
$29.60
0.1250 (1/8)" CUTTER DIA X 0.7500 (3/4)" LENGTH OF CUT CARBIDE SQUARE END MILL, 4 FLUTES
12508
2 FL - 0.1250" (1/8) Cutter DIA x 0.7500" (3/4) LOC
HARVEY TOOL
$40.70
0.1250" (1/8) Cutter DIA x 0.7500" (3/4) Length of Cut Carbide Square Upcut End Mill for Plastic, 2 Flutes
745708
3 FL - 0.1250" (1/8) Cutter DIA x 0.7500" (3/4) LOC - Uncoated
TITAN USA
Now:
$26.73
Was:
$29.70
0.1250" (1/8) Cutter DIA x 0.7500" (3/4) Length of Cut Carbide Square End Mill for Aluminum Chipbreaker, 3 Flutes, Uncoated
TC67216
3 FL - 0.1250 (1/8)" CUTTER DIA X 0.7500 (3/4)" LOC, 894308
HARVEY TOOL
$27.90
0.1250 (1/8)" CUTTER DIA X 0.7500 (3/4)" LENGTH OF CUT CARBIDE SQUARE END MILL, 3 FLUTES
894308
3 FL - 0.1250 (1/8)" CUTTER DIA X 0.7500 (3/4)" LOC, 877208
HARVEY TOOL
$31.20
0.1250 (1/8)" CUTTER DIA X 0.7500 (3/4)" LENGTH OF CUT CARBIDE BALL END MILL, 3 FLUTES
877208
Out of stock
4 FL - 0.1250" (1/8) Cutter DIA x 0.7500" (3/4) LOC - AlTiN Coated
HARVEY TOOL
$40.60
0.1250" (1/8) Cutter DIA x 0.7500" (3/4) Length of Cut Carbide Ball End Mill, 4 Flutes, AlTiN Coated
750308-C3
4 FL - 0.1250" (1/8) Cutter DIA x 0.0100" Radius x 0.7500" (3/4) LOC
HARVEY TOOL
$32.20
0.1250" (1/8) Cutter DIA x 0.0100" Radius x 0.7500" (3/4) Length of Cut Carbide Corner Radius End Mill, 4 Flutes
733810
4 FL - 0.1250" (1/8) Cutter DIA x 0.3750" (3/8) LOC x 0.7500" (3/4) Reach
HARVEY TOOL
$48.50
0.1250" (1/8) Cutter DIA x 0.3750" (3/8) Length of Cut x 0.7500" (3/4) Reach Carbide Ball End Mill, 4 Flutes
805808
3 FL - 0.1250" (1/8) Cutter DIA x 0.7500" (3/4) LOC - ZrN Coated
TITAN USA
Now:
$31.37
Was:
$34.85
0.1250" (1/8) Cutter DIA x 0.7500" (3/4) Length of Cut Carbide Square End Mill for Aluminum Chipbreaker, 3 Flutes, ZrN Coated
TC67241