HARVEY TOOL
4 FL - 0.1250 (1/8)" CUTTER DIA X 0.0300" RADIUS X 0.5000 (1/2)" LOC, 32430
- SKU:
- 32430
- Shipping:
- Calculated at Checkout
Description
0.1250 (1/8)" CUTTER DIA X 0.0300" RADIUS X 0.5000 (1/2)" LENGTH OF CUT CARBIDE CORNER RADIUS END MILL, 4 FLUTES
View AllClose
Additional Information
Cutter Diameter: |
0.1250" (1/8) |
Length of Cut: |
0.5000" (1/2) |
Overall Length: |
1.5000" (1-1/2) |
Corner Radius: |
0.0300" |
Flutes: |
4" |
LOC Multiple: |
(4x) |
Shank Diameter: |
0.1250" (1/8) |
Metric: |
N |
Coating: |
UN |
Related Products
Related Products
4 FL - 0.1250 (1/8)" CUTTER DIA X 0.0300" RADIUS X 0.5000 (1/2)" LOC - ALTIN COATED, 32430-C3
HARVEY TOOL
$29.40
0.1250 (1/8)" CUTTER DIA X 0.0300" RADIUS X 0.5000 (1/2)" LENGTH OF CUT CARBIDE CORNER RADIUS END MILL, 4 FLUTES, ALTIN COATED
32430-C3
4 FL - 0.1250 (1/8)" CUTTER DIA X 0.0300" RADIUS X 0.5000 (1/2)" LOC - AMORPHOUS DIAMOND COATED, 32430-C4
HARVEY TOOL
$37.70
0.1250 (1/8)" CUTTER DIA X 0.0300" RADIUS X 0.5000 (1/2)" LENGTH OF CUT CARBIDE CORNER RADIUS END MILL, 4 FLUTES, AMORPHOUS DIAMOND COATED
32430-C4
2 FL - 0.1250 (1/8)" CUTTER DIA X 0.0300" RADIUS X 0.5000 (1/2)" LOC, 46430
HARVEY TOOL
$23.90
0.1250 (1/8)" CUTTER DIA X 0.0300" RADIUS X 0.5000 (1/2)" LENGTH OF CUT CARBIDE CORNER RADIUS END MILL, 2 FLUTES
46430
Out of stock
5 FL - 0.1250" (1/8) Cutter DIA x 0.0300" Radius x 0.5000" (1/2) LOC - Uncoated
TITAN USA
Now:
$16.65
Was:
$18.50
0.1250" (1/8) Cutter DIA x 0.0300" Radius x 0.5000" (1/2) Length of Cut Carbide Corner Radius End Mill, 5 Flutes, Uncoated
TC63810
3 FL - 0.1250" (1/8) Cutter DIA x 0.0300" Radius x 0.5000" (1/2) LOC - Uncoated
TITAN USA
Now:
$18.90
Was:
$21.00
0.1250" (1/8) Cutter DIA x 0.0300" Radius x 0.5000" (1/2) Length of Cut Carbide Corner Radius End Mill for Aluminum Chipbreaker, 3 Flutes, Uncoated
TC67282
3 FL - 0.1250 (1/8)" CUTTER DIA X 0.0300" RADIUS X 0.5000 (1/2)" LOC, 870930
HARVEY TOOL
$23.90
0.1250 (1/8)" CUTTER DIA X 0.0300" RADIUS X 0.5000 (1/2)" LENGTH OF CUT CARBIDE CORNER RADIUS END MILL, 3 FLUTES
870930
3 FL - 0.1250" (1/8) Cutter DIA x 0.0300" Radius x 0.5000" (1/2) LOC - ZrN Coated
TITAN USA
Now:
$23.31
Was:
$25.90
0.1250" (1/8) Cutter DIA x 0.0300" Radius x 0.5000" (1/2) Length of Cut Carbide Corner Radius End Mill for Aluminum Chipbreaker, 3 Flutes, ZrN Coated
TC67383
Out of stock
5 FL - 0.1250" (1/8) Cutter DIA x 0.0300" Radius x 0.5000" (1/2) LOC - AlTiN Coated
TITAN USA
Now:
$20.61
Was:
$22.90
0.1250" (1/8) Cutter DIA x 0.0300" Radius x 0.5000" (1/2) Length of Cut Carbide Corner Radius End Mill, 5 Flutes, AlTiN Coated
TC63910