HARVEY TOOL
4 FL - 0.1180" (3 mm) Cutter DIA x 0.1770" LOC x 0.6250" (5/8) Reach - AlTiN Coated
- SKU:
- 803105-C3
- Shipping:
- Calculated at Checkout
Description
0.1180" (3 mm) Cutter DIA x 0.1770" Length of Cut x 0.6250" (5/8) Reach Carbide Ball End Mill, 4 Flutes, AlTiN Coated
View AllClose
Additional Information
Cutter Diameter: |
0.1180" (3 mm) |
Neck Diameter: |
0.1165" |
Length of Cut: |
0.1770" |
Overall Reach: |
0.6250" (5/8) |
Overall Length: |
2.5000" (2-1/2) |
Flutes: |
4" |
LOC Multiple: |
(1.5x) |
Reach Multiple: |
(5x) |
Shank Diameter: |
0.1250" (1/8) |
Metric: |
N |
Coating: |
C3 |
Related Products
Related Products
4 FL - 0.1180" (3 mm) Cutter DIA x 0.1770" LOC x 0.6250" (5/8) Reach
HARVEY TOOL
$44.90
0.1180" (3 mm) Cutter DIA x 0.1770" Length of Cut x 0.6250" (5/8) Reach Carbide Ball End Mill, 4 Flutes
803105
3 FL - 0.1180 (3 MM)" CUTTER DIA X 0.1770" LOC X 0.6250 (5/8)" REACH - ALTIN COATED, 33505-C3
HARVEY TOOL
$50.40
0.1180 (3 MM)" CUTTER DIA X 0.1770" LENGTH OF CUT X 0.6250 (5/8)" REACH CARBIDE BALL END MILL, 3 FLUTES, ALTIN COATED
33505-C3
3 FL - 0.1180 (3 MM)" CUTTER DIA X 0.1770" LOC X 0.6250 (5/8)" REACH - ALTIN COATED, 33305-C3
HARVEY TOOL
$43.90
0.1180 (3 MM)" CUTTER DIA X 0.1770" LENGTH OF CUT X 0.6250 (5/8)" REACH CARBIDE SQUARE END MILL, 3 FLUTES, ALTIN COATED
33305-C3
4 FL - 0.1180" (3 mm) Cutter DIA x 0.1770" LOC x 0.9500" Reach - AlTiN Coated
HARVEY TOOL
$44.70
0.1180" (3 mm) Cutter DIA x 0.1770" Length of Cut x 0.9500" Reach Carbide Square End Mill, 4 Flutes, AlTiN Coated
874205-C3
3 FL - 0.1180 (3 MM)" CUTTER DIA X 0.1770" LOC X 0.6250 (5/8)" REACH, 33505
HARVEY TOOL
$44.90
0.1180 (3 MM)" CUTTER DIA X 0.1770" LENGTH OF CUT X 0.6250 (5/8)" REACH CARBIDE BALL END MILL, 3 FLUTES
33505
3 FL - 0.1180 (3 MM)" CUTTER DIA X 0.1770" LOC X 0.6250 (5/8)" REACH, 33305
HARVEY TOOL
$38.40
0.1180 (3 MM)" CUTTER DIA X 0.1770" LENGTH OF CUT X 0.6250 (5/8)" REACH CARBIDE SQUARE END MILL, 3 FLUTES
33305
3 FL - 0.1180" (3 mm) Cutter DIA x 0.1770" LOC x 1.4200" Reach - AlTiN Coated
HARVEY TOOL
$53.90
0.1180" (3 mm) Cutter DIA x 0.1770" Length of Cut x 1.4200" Reach Carbide Ball End Mill, 3 Flutes, AlTiN Coated
35605-C3
3 FL - 0.1180" (3 mm) Cutter DIA x 0.1770" LOC x 0.7350" Reach - AlTiN Coated
HARVEY TOOL
$44.00
0.1180" (3 mm) Cutter DIA x 0.1770" Length of Cut x 0.7350" Reach Carbide Square End Mill, 3 Flutes, AlTiN Coated
937105-C3