HARVEY TOOL
3 FL - 0.1250" (1/8) Cutter DIA x 1.0000" (1) LOC x 1.2500" (1-1/4) Reach
- SKU:
- 755708
- Shipping:
- Calculated at Checkout
Description
0.1250" (1/8) Cutter DIA x 1.0000" (1) Length of Cut x 1.2500" (1-1/4) Reach Carbide Square End Mill, 3 Flutes
View AllClose
Additional Information
Cutter Diameter: |
0.1250" (1/8) |
Neck Diameter: |
0.1210" |
Length of Cut: |
1.0000" (1) |
Overall Reach: |
1.2500" (1-1/4) |
Overall Length: |
2.5000" (2-1/2) |
Flutes: |
3" |
LOC Multiple: |
(8x) |
Reach Multiple: |
(10x) |
Shank Diameter: |
0.1250" (1/8) |
Metric: |
N |
Coating: |
UN |
Related Products
Related Products
3 FL - 0.1250" (1/8) Cutter DIA x 1.0000" (1) LOC x 1.2500" (1-1/4) Reach - AlTiN Coated
HARVEY TOOL
$47.50
0.1250" (1/8) Cutter DIA x 1.0000" (1) Length of Cut x 1.2500" (1-1/4) Reach Carbide Square End Mill, 3 Flutes, AlTiN Coated
755708-C3
3 FL - 1.0000" (1) Cutter DIA x 0.1250" (1/8) Radius x 1.2500" (1-1/4) LOC - Uncoated
TITAN USA
Now:
$276.17
Was:
$306.85
1.0000" (1) Cutter DIA x 0.1250" (1/8) Radius x 1.2500" (1-1/4) Length of Cut Carbide Corner Radius End Mill for Aluminum Chipbreaker, 3 Flutes, Uncoated
TC67278
4 FL - 0.1250" (1/8) Cutter DIA x 0.1870" (3/16) LOC x 1.2500" (1-1/4) Reach
HARVEY TOOL
$49.30
0.1250" (1/8) Cutter DIA x 0.1870" (3/16) Length of Cut x 1.2500" (1-1/4) Reach Carbide Ball End Mill, 4 Flutes
769308
2 FL - 0.1250" (1/8) Cutter DIA x 0.3750" (3/8) LOC x 1.2500" (1-1/4) Reach
HARVEY TOOL
$50.10
0.1250" (1/8) Cutter DIA x 0.3750" (3/8) Length of Cut x 1.2500" (1-1/4) Reach Carbide Square Upcut End Mill for Plastic, 2 Flutes
748108
4 FL - 0.1250 (1/8)" CUTTER DIA X 0.3750 (3/8)" LOC X 1.2500 (1-1/4)" REACH, 846208
HARVEY TOOL
$41.60
0.1250 (1/8)" CUTTER DIA X 0.3750 (3/8)" LENGTH OF CUT X 1.2500 (1-1/4)" REACH CARBIDE SQUARE END MILL, 4 FLUTES
846208
3 FL - 1.0000" (1) Cutter DIA x 0.1250" (1/8) Radius x 1.2500" (1-1/4) LOC - ZrN Coated
TITAN USA
Now:
$302.22
Was:
$335.80
1.0000" (1) Cutter DIA x 0.1250" (1/8) Radius x 1.2500" (1-1/4) Length of Cut Carbide Corner Radius End Mill for Aluminum Chipbreaker, 3 Flutes, ZrN Coated
TC67379
3 FL - 0.1250" (1/8) Cutter DIA x 1.0000" (1) LOC
HARVEY TOOL
$41.90
0.1250" (1/8) Cutter DIA x 1.0000" (1) Length of Cut Carbide Square End Mill for Aluminum Alloys, 3 Flutes
746108
4 FL - 0.1250" (1/8) Cutter DIA x 1.2500" (1-1/4) LOC
HARVEY TOOL
$51.60
0.1250" (1/8) Cutter DIA x 1.2500" (1-1/4) Length of Cut Carbide Square End Mill, 4 Flutes
802708
4 FL - 0.1250 (1/8)" CUTTER DIA X 0.3750 (3/8)" LOC X 1.2500 (1-1/4)" REACH, 851108
HARVEY TOOL
$51.50
0.1250 (1/8)" CUTTER DIA X 0.3750 (3/8)" LENGTH OF CUT X 1.2500 (1-1/4)" REACH CARBIDE BALL END MILL, 4 FLUTES
851108