MICRO 100
3 FL - 0.1250" (1/8) CUTTER DIA X 0.500" (1/2) LOC ,BEM-125-03
- SKU:
- BEM-125-03
- MPN:
- BEM-125-03
- Availability:
- 28
- Shipping:
- Calculated at Checkout
Description
0.1250" (1/8) CUTTER DIA X 0.500" (1/2) LENGTH OF CUT CARBIDE BALL END MILL, 3 FLUTES,BEM-125-03
View AllClose
Additional Information
Cutter Diameter: |
0.1250" (1/8) |
Coating: |
UN |
Flutes: |
3 |
Length of Cut: |
0.500" (1/2) |
Shank Diameter: |
0.1250" (1/8) |
Overall Length: |
1.50" (1-1/2) |
Metric: |
N |
Related Products
Related Products
2 FL - 0.1250" (1/8) CUTTER DIA X 0.500" (1/2) LOC ,BEM-125-02
MICRO 100
$17.00
0.1250" (1/8) CUTTER DIA X 0.500" (1/2) LENGTH OF CUT CARBIDE BALL END MILL, 2 FLUTES,BEM-125-02
BEM-125-02
4 FL - 0.1250" (1/8) CUTTER DIA X 0.500" (1/2) LOC ,BEM-125-04
MICRO 100
$17.00
0.1250" (1/8) CUTTER DIA X 0.500" (1/2) LENGTH OF CUT CARBIDE BALL END MILL, 4 FLUTES,BEM-125-04
BEM-125-04
3 FL - 0.1250" (1/8) CUTTER DIA X 0.500" (1/2) LOC - ALTIN COATED,BEM-125-03X
MICRO 100
$19.95
0.1250" (1/8) CUTTER DIA X 0.500" (1/2) LENGTH OF CUT CARBIDE BALL END MILL, 3 FLUTES, ALTIN COATED,BEM-125-03X
BEM-125-03X
2 FL - 0.1250" (1/8) CUTTER DIA X 0.500" (1/2) LOC - ALTIN COATED,BEM-125-02X
MICRO 100
$19.95
0.1250" (1/8) CUTTER DIA X 0.500" (1/2) LENGTH OF CUT CARBIDE BALL END MILL, 2 FLUTES, ALTIN COATED,BEM-125-02X
BEM-125-02X
4 FL - 0.1250" (1/8) CUTTER DIA X 0.500" (1/2) LOC - ALTIN COATED,BEM-125-04X
MICRO 100
$19.95
0.1250" (1/8) CUTTER DIA X 0.500" (1/2) LENGTH OF CUT CARBIDE BALL END MILL, 4 FLUTES, ALTIN COATED,BEM-125-04X
BEM-125-04X
3 FL - 0.1250" (1/8) CUTTER DIA X 0.500" (1/2) LOC ,EMS-125-3
MICRO 100
$17.80
0.1250" (1/8) CUTTER DIA X 0.500" (1/2) LENGTH OF CUT CARBIDE SQUARE END MILL - NC TOLERANCE, 3 FLUTES,EMS-125-3
EMS-125-3
3 FL - 0.1250" (1/8) CUTTER DIA X 0.500" (1/2) LOC ,GEM-125-3
MICRO 100
$14.90
0.1250" (1/8) CUTTER DIA X 0.500" (1/2) LENGTH OF CUT CARBIDE SQUARE END MILL, 3 FLUTES,GEM-125-3
GEM-125-3
2 FL - 0.1250" (1/8) CUTTER DIA X 0.500" (1/2) LOC ,GEM-125-2
MICRO 100
$14.90
0.1250" (1/8) CUTTER DIA X 0.500" (1/2) LENGTH OF CUT CARBIDE SQUARE END MILL, 2 FLUTES,GEM-125-2
GEM-125-2
2 FL - 0.1250" (1/8) CUTTER DIA X 0.500" (1/2) LOC ,EMS-125-2
MICRO 100
$17.80
0.1250" (1/8) CUTTER DIA X 0.500" (1/2) LENGTH OF CUT CARBIDE SQUARE END MILL - NC TOLERANCE, 2 FLUTES,EMS-125-2
EMS-125-2