HARVEY TOOL
2 FL - 0.5000 (1/2)" CUTTER DIA X 0.0300" RADIUS X 0.2500 (1/4)" LOC X 1.0000 (1)" REACH, 12232
- SKU:
- 12232
- Shipping:
- Calculated at Checkout
Description
0.5000 (1/2)" CUTTER DIA X 0.0300" RADIUS X 0.2500 (1/4)" LENGTH OF CUT X 1.0000 (1)" REACH PCD CORNER RADIUS END MILL, 2 FLUTES
View AllClose
Additional Information
Cutter Diameter: |
0.5000" (1/2) |
Neck Diameter: |
0.4610" |
Length of Cut: |
0.2500" (1/4) |
Overall Reach: |
1.0000" (1) |
Overall Length: |
3.0000" (3) |
Corner Radius: |
0.0300" |
Flutes: |
2" |
Shank Diameter: |
0.5000" (1/2) |
Metric: |
N |
Coating: |
PCD |
Related Products
Related Products
2 FL - 0.5000" (1/2) Cutter DIA x 0.0300" Radius x 1.0000" (1) LOC
HARVEY TOOL
$76.80
0.5000" (1/2) Cutter DIA x 0.0300" Radius x 1.0000" (1) Length of Cut Carbide Corner Radius End Mill, 2 Flutes
733930
2 FL - 0.5000" (1/2) Cutter DIA x 0.0100" Radius x 0.2500" (1/4) LOC x 1.0000" (1) Reach - PCD
HARVEY TOOL
$556.40
858932
2 FL - 0.5000" (1/2) Cutter DIA x 0.0600" Radius x 0.2500" (1/4) LOC x 1.0000" (1) Reach - PCD
HARVEY TOOL
$556.40
847332
4 FL - 0.5000 (1/2)" CUTTER DIA X 0.0300" RADIUS X 1.0000 (1)" LOC, 74530
HARVEY TOOL
$76.80
0.5000 (1/2)" CUTTER DIA X 0.0300" RADIUS X 1.0000 (1)" LENGTH OF CUT CARBIDE CORNER RADIUS END MILL, 4 FLUTES
74530
2 FL - 0.2500" (1/4) Cutter DIA x 0.5000" (1/2) LOC x 1.0000" (1) Reach - PCD
HARVEY TOOL
$420.10
0.2500" (1/4) Cutter DIA x 0.5000" (1/2) Length of Cut x 1.0000" (1) Reach PCD Square End Mill, 2 Flutes, PCD
739216
2 FL - 0.5000 (1/2)" CUTTER DIA X 0.2500 (1/4)" LOC X 1.0000 (1)" REACH, 12132
HARVEY TOOL
$517.10
0.5000 (1/2)" CUTTER DIA X 0.2500 (1/4)" LENGTH OF CUT X 1.0000 (1)" REACH PCD SQUARE END MILL, 2 FLUTES
12132
4 FL - 0.2500 (1/4)" CUTTER DIA X 0.5000 (1/2)" LOC X 1.0000 (1)" REACH, 914116
HARVEY TOOL
$556.60
0.2500 (1/4)" CUTTER DIA X 0.5000 (1/2)" LENGTH OF CUT X 1.0000 (1)" REACH PCD SQUARE END MILL, 4 FLUTES
914116
2 FL - 0.2500" (1/4) Cutter DIA x 0.5000" (1/2) LOC x 1.0000" (1) Reach - PCD - 714116
HARVEY TOOL
$440.40
714116
5 FL - 0.2500" (1/4) Cutter DIA x 0.0300" Radius x 0.5000" (1/2) LOC - Uncoated
TITAN USA
Now:
$16.47
Was:
$18.30
0.2500" (1/4) Cutter DIA x 0.0300" Radius x 0.5000" (1/2) Length of Cut Carbide Corner Radius End Mill, 5 Flutes, Uncoated
TC61617