HARVEY TOOL
2 FL - 0.1250 (1/8)" CUTTER DIA X 0.2500 (1/4)" LOC, 14608
- SKU:
- 14608
- Shipping:
- Calculated at Checkout
Description
0.1250 (1/8)" CUTTER DIA X 0.2500 (1/4)" LENGTH OF CUT CARBIDE COMPOSITE CUTTING SQUARE END MILL, 2 FLUTES
View AllClose
Additional Information
Cutter Diameter: |
0.1250" (1/8) |
Length of Cut: |
0.2500" (1/4) |
Overall Length: |
2.0000" (2) |
Flutes: |
2" |
LOC Multiple: |
(2x) |
Shank Diameter: |
0.2500" (1/4) |
Metric: |
N |
Coating: |
UN |
Related Products
Related Products
2 FL - 0.1250 (1/8)" CUTTER DIA X 0.2500 (1/4)" LOC - AMORPHOUS DIAMOND COATED, 14608-C4
HARVEY TOOL
$63.70
0.1250 (1/8)" CUTTER DIA X 0.2500 (1/4)" LENGTH OF CUT CARBIDE COMPOSITE CUTTING SQUARE END MILL, 2 FLUTES, AMORPHOUS DIAMOND COATED
14608-C4
1 FL - 0.1250 (1/8)" CUTTER DIA X 0.2500 (1/4)" LOC, 14208-10
HARVEY TOOL
$37.90
0.1250 (1/8)" CUTTER DIA X 0.2500 (1/4)" LENGTH OF CUT CARBIDE SQUARE UPCUT END MILL FOR PLASTIC, 1 FLUTE
14208-10
1 FL - 0.1250 (1/8)" CUTTER DIA X 0.2500 (1/4)" LOC, 14108-10
HARVEY TOOL
$37.90
0.1250 (1/8)" CUTTER DIA X 0.2500 (1/4)" LENGTH OF CUT CARBIDE SQUARE UPCUT END MILL FOR PLASTIC, 1 FLUTE
14108-10
1 FL - 0.1250 (1/8)" CUTTER DIA X 0.2500 (1/4)" LOC X 0.5000 (1/2)" REACH, 12108
HARVEY TOOL
$284.90
0.1250 (1/8)" CUTTER DIA X 0.2500 (1/4)" LENGTH OF CUT X 0.5000 (1/2)" REACH PCD SQUARE END MILL, 1 FLUTE
12108
2 FL - 0.1250" (1/8) Cutter DIA x 0.250" (1/4) LOC
MICRO 100
$14.10
0.1250" (1/8) Cutter DIA x 0.250" (1/4) Length of Cut Carbide Square End Mill, 2 Flutes
SEM-125-02
1 FL - 0.1250 (1/8)" CUTTER DIA X 0.2500 (1/4)" LOC X 0.5000 (1/2)" REACH, 12008
HARVEY TOOL
$345.70
0.1250 (1/8)" CUTTER DIA X 0.2500 (1/4)" LENGTH OF CUT X 0.5000 (1/2)" REACH PCD BALL END MILL, 1 FLUTE
12008
4 FL - 0.1250" (1/8) Cutter DIA x 0.5000" (1/2) LOC
HARVEY TOOL
$32.40
0.1250" (1/8) Cutter DIA x 0.5000" (1/2) Length of Cut Carbide Ball End Mill, 4 Flutes
801608
3 FL - 0.0250" CUTTER DIA X 0.1250 (1/8)" LOC X 0.2500 (1/4)" REACH, 13625
HARVEY TOOL
$40.90
0.0250" CUTTER DIA X 0.1250 (1/8)" LENGTH OF CUT X 0.2500 (1/4)" REACH CARBIDE SQUARE END MILL, 3 FLUTES
13625
5 FL - 0.1250" (1/8) Cutter DIA x 0.0300" Radius x 0.2500" (1/4) LOC - Uncoated
TITAN USA
Now:
$8.91
Was:
$9.90
0.1250" (1/8) Cutter DIA x 0.0300" Radius x 0.2500" (1/4) Length of Cut Carbide Corner Radius End Mill, 5 Flutes, Uncoated
TC61610