HARVEY TOOL
2 FL - 0.0390 (1 MM)" CUTTER DIA X 0.1170" LOC - AMORPHOUS DIAMOND COATED, 74039-C4
- SKU:
- 74039-C4
- Shipping:
- Calculated at Checkout
Description
0.0390 (1 MM)" CUTTER DIA X 0.1170" LENGTH OF CUT CARBIDE BALL END MILL, 2 FLUTES, AMORPHOUS DIAMOND COATED
View AllClose
Additional Information
Cutter Diameter: |
0.0390" (1 mm) |
Length of Cut: |
0.1170" |
Overall Length: |
1.5000" (1-1/2) |
Flutes: |
2" |
LOC Multiple: |
(3x) |
Shank Diameter: |
0.1250" (1/8) |
Metric: |
N |
Coating: |
C4 |
Center Cutting: |
N |
Chip Breaker: |
N |
Double Ended: |
N |
Weldon Flat: |
N |
Coolant Through: |
N |
Related Products
Related Products
2 FL - 0.0390" (1 mm) Cutter DIA x 0.1170" LOC - Amorphous Diamond Coated
HARVEY TOOL
$33.00
0.0390" (1 mm) Cutter DIA x 0.1170" Length of Cut Carbide Square End Mill, 2 Flutes, Amorphous Diamond Coated
72039-C4
4 FL - 0.0390 (1 MM)" CUTTER DIA X 0.1170" LOC - AMORPHOUS DIAMOND COATED, 73039-C4
HARVEY TOOL
$33.00
0.0390 (1 MM)" CUTTER DIA X 0.1170" LENGTH OF CUT CARBIDE SQUARE END MILL, 4 FLUTES, AMORPHOUS DIAMOND COATED
73039-C4
2 FL - 0.0390 (1 MM)" CUTTER DIA X 0.1170" LOC, 74039
HARVEY TOOL
$25.10
0.0390 (1 MM)" CUTTER DIA X 0.1170" LENGTH OF CUT CARBIDE BALL END MILL, 2 FLUTES
74039
4 FL - 0.0390" (1 mm) Cutter DIA x 0.1170" LOC - Amorphous Diamond Coated
HARVEY TOOL
$38.90
0.0390" (1 mm) Cutter DIA x 0.1170" Length of Cut Carbide Ball End Mill, 4 Flutes, Amorphous Diamond Coated
74339-C4
2 FL - 0.0390 (1 MM)" CUTTER DIA X 0.1170" LOC - ALTIN COATED, 74039-C3
HARVEY TOOL
$30.60
0.0390 (1 MM)" CUTTER DIA X 0.1170" LENGTH OF CUT CARBIDE BALL END MILL, 2 FLUTES, ALTIN COATED
74039-C3
4 FL - 0.0130" CUTTER DIA X 0.0390" LOC - AMORPHOUS DIAMOND COATED, 73013-C4
HARVEY TOOL
$42.10
0.0130" CUTTER DIA X 0.0390" LENGTH OF CUT CARBIDE SQUARE END MILL, 4 FLUTES, AMORPHOUS DIAMOND COATED
73013-C4
3 FL - 0.0390 (1 MM)" CUTTER DIA X 0.2030 (13/64)" LOC - AMORPHOUS DIAMOND COATED, 31839-C4
HARVEY TOOL
$45.60
0.0390 (1 MM)" CUTTER DIA X 0.2030 (13/64)" LENGTH OF CUT CARBIDE SQUARE END MILL, 3 FLUTES, AMORPHOUS DIAMOND COATED
31839-C4
2 FL - 0.0390 (1 MM)" CUTTER DIA X 0.1170" LOC, 24139
HARVEY TOOL
$24.80
0.0390 (1 MM)" CUTTER DIA X 0.1170" LENGTH OF CUT CARBIDE 45° HELIX SQUARE END MILL, 2 FLUTES
24139
3 FL - 0.0390 (1 MM)" CUTTER DIA X 0.0590" LOC X 0.3250" REACH - AMORPHOUS DIAMOND COATED, 34639-C4
HARVEY TOOL
$53.20
0.0390 (1 MM)" CUTTER DIA X 0.0590" LENGTH OF CUT X 0.3250" REACH CARBIDE SQUARE END MILL, 3 FLUTES, AMORPHOUS DIAMOND COATED
34639-C4