MICRO 100
1 FL - 0.1250" (1/8) CUTTER DIA X 0.500" (1/2) LOC ,SFP-125-44
- SKU:
- SFP-125-44
- MPN:
- SFP-125-44
- Availability:
- 53
- Shipping:
- Calculated at Checkout
Description
0.1250" (1/8) CUTTER DIA X 0.500" (1/2) LENGTH OF CUT CARBIDE SQUARE UPCUT FOR PLASTIC, 1 FLUTE,SFP-125-44
View AllClose
Additional Information
Cutter Diameter: |
0.1250" (1/8) |
Coating: |
UN |
Flutes: |
1 |
Length of Cut: |
0.500" (1/2) |
Shank Diameter: |
0.2500" (1/4) |
Overall Length: |
2.00" (2) |
Metric: |
N |
Related Products
Related Products
2 FL - 0.1250" (1/8) CUTTER DIA X 0.500" (1/2) LOC ,EMS-125-2
MICRO 100
$17.80
0.1250" (1/8) CUTTER DIA X 0.500" (1/2) LENGTH OF CUT CARBIDE SQUARE END MILL - NC TOLERANCE, 2 FLUTES,EMS-125-2
EMS-125-2
2 FL - 0.1250" (1/8) CUTTER DIA X 0.500" (1/2) LOC ,GEM-125-2
MICRO 100
$14.90
0.1250" (1/8) CUTTER DIA X 0.500" (1/2) LENGTH OF CUT CARBIDE SQUARE END MILL, 2 FLUTES,GEM-125-2
GEM-125-2
1 FL - 0.1250" (1/8) Cutter DIA x 0.500" (1/2) LOC
MICRO 100
$28.60
0.1250" (1/8) Cutter DIA x 0.500" (1/2) Length of Cut Carbide Square Upcut for Plastic, 1 Flute
SFP-125-24
2 FL - 0.1250" (1/8) CUTTER DIA X 0.500" (1/2) LOC ,BEM-125-02
MICRO 100
$17.00
0.1250" (1/8) CUTTER DIA X 0.500" (1/2) LENGTH OF CUT CARBIDE BALL END MILL, 2 FLUTES,BEM-125-02
BEM-125-02
4 FL - 0.1250" (1/8) CUTTER DIA X 0.500" (1/2) LOC ,EMS-125-4
MICRO 100
$17.80
0.1250" (1/8) CUTTER DIA X 0.500" (1/2) LENGTH OF CUT CARBIDE SQUARE END MILL - NC TOLERANCE, 4 FLUTES,EMS-125-4
EMS-125-4
3 FL - 0.1250" (1/8) CUTTER DIA X 0.500" (1/2) LOC ,BEM-125-03
MICRO 100
$17.00
0.1250" (1/8) CUTTER DIA X 0.500" (1/2) LENGTH OF CUT CARBIDE BALL END MILL, 3 FLUTES,BEM-125-03
BEM-125-03
3 FL - 0.1250" (1/8) CUTTER DIA X 0.500" (1/2) LOC ,EMS-125-3
MICRO 100
$17.80
0.1250" (1/8) CUTTER DIA X 0.500" (1/2) LENGTH OF CUT CARBIDE SQUARE END MILL - NC TOLERANCE, 3 FLUTES,EMS-125-3
EMS-125-3
4 FL - 0.1250" (1/8) CUTTER DIA X 0.500" (1/2) LOC ,GEM-125-4
MICRO 100
$14.90
0.1250" (1/8) CUTTER DIA X 0.500" (1/2) LENGTH OF CUT CARBIDE SQUARE END MILL, 4 FLUTES,GEM-125-4
GEM-125-4
3 FL - 0.1250" (1/8) CUTTER DIA X 0.500" (1/2) LOC ,GEM-125-3
MICRO 100
$14.90
0.1250" (1/8) CUTTER DIA X 0.500" (1/2) LENGTH OF CUT CARBIDE SQUARE END MILL, 3 FLUTES,GEM-125-3
GEM-125-3