MICRO 100
1 FL - 0.1250" (1/8) CUTTER DIA X 0.250" (1/4) LOC ,SFL-125-42
- SKU:
- SFL-125-42
- MPN:
- SFL-125-42
- Availability:
- 11
- Shipping:
- Calculated at Checkout
Description
0.1250" (1/8) CUTTER DIA X 0.250" (1/4) LENGTH OF CUT CARBIDE SQUARE DOWNCUT END MILL FOR PLASTIC, 1 FLUTE,SFL-125-42
View AllClose
Additional Information
Cutter Diameter: |
0.1250" (1/8) |
Coating: |
UN |
Flutes: |
1 |
Length of Cut: |
0.250" (1/4) |
Shank Diameter: |
0.2500" (1/4) |
Overall Length: |
2.00" (2) |
Metric: |
N |
Related Products
Related Products
1 FL - 0.1250" (1/8) Cutter DIA x 0.250" (1/4) LOC
MICRO 100
$33.30
0.1250" (1/8) Cutter DIA x 0.250" (1/4) Length of Cut Carbide Square Upcut for Plastic, 1 Flute
SFP-125-42
4 FL - 0.1250" (1/8) Cutter DIA x 0.250" (1/4) LOC
MICRO 100
$14.10
0.1250" (1/8) Cutter DIA x 0.250" (1/4) Length of Cut Carbide Square End Mill, 4 Flutes
SEM-125-04
3 FL - 0.1250" (1/8) Cutter DIA x 0.250" (1/4) LOC
MICRO 100
$14.10
0.1250" (1/8) Cutter DIA x 0.250" (1/4) Length of Cut Carbide Square End Mill, 3 Flutes
SEM-125-03
2 FL - 0.1250" (1/8) Cutter DIA x 0.250" (1/4) LOC
MICRO 100
$14.10
0.1250" (1/8) Cutter DIA x 0.250" (1/4) Length of Cut Carbide Square End Mill, 2 Flutes
SEM-125-02
4 FL - 0.1250" (1/8) Cutter DIA x 0.250" (1/4) LOC - AlTiN Coated
MICRO 100
$17.05
0.1250" (1/8) Cutter DIA x 0.250" (1/4) Length of Cut Carbide Square End Mill, 4 Flutes, AlTiN Coated
SEM-125-04X
3 FL - 0.1250" (1/8) Cutter DIA x 0.250" (1/4) LOC - AlTiN Coated
MICRO 100
$17.05
0.1250" (1/8) Cutter DIA x 0.250" (1/4) Length of Cut Carbide Square End Mill, 3 Flutes, AlTiN Coated
SEM-125-03X
2 FL - 0.1250" (1/8) Cutter DIA x 0.250" (1/4) LOC - AlTiN Coated
MICRO 100
$17.05
0.1250" (1/8) Cutter DIA x 0.250" (1/4) Length of Cut Carbide Square End Mill, 2 Flutes, AlTiN Coated
SEM-125-02X
4 FL - 0.1250" (1/8) CUTTER DIA X 0.500" (1/2) LOC ,EMS-125-4
MICRO 100
$17.80
0.1250" (1/8) CUTTER DIA X 0.500" (1/2) LENGTH OF CUT CARBIDE SQUARE END MILL - NC TOLERANCE, 4 FLUTES,EMS-125-4
EMS-125-4
4 FL - 0.1250" (1/8) CUTTER DIA X 0.500" (1/2) LOC ,GEM-125-4
MICRO 100
$14.90
0.1250" (1/8) CUTTER DIA X 0.500" (1/2) LENGTH OF CUT CARBIDE SQUARE END MILL, 4 FLUTES,GEM-125-4
GEM-125-4