HARVEY TOOL
1/16, 1/8-27 - 0.2450" Cutter DIA x 0.4370" (7/16) LOC - 3 FL
- SKU:
- 784304
- Shipping:
- Calculated at Checkout
Description
0.2450" Cutter DIA x 0.4370" (7/16) Length of Cut Carbide Multi-Form 1/16, 1/8-27 NPTF Thread Milling Cutter, 3 Flutes
View AllClose
Additional Information
Cutter Diameter: |
0.2450" |
Length of Cut: |
0.4370" (7/16) |
Overall Length: |
2.5000" (2-1/2) |
Angle per Side: |
1°47' |
Included Angle: |
60 |
Flutes: |
3" |
Size: |
1/16, 1/8-27 |
Shank Diameter: |
0.2500" (1/4) |
Metric: |
N |
Coating: |
UN |
Related Products
Related Products
1/16, 1/8-27 - 0.2450" CUTTER DIA X 0.4370 (7/16)" LOC - 3 FL, 70204
HARVEY TOOL
$157.10
0.2450" CUTTER DIA X 0.4370 (7/16)" LENGTH OF CUT CARBIDE MULTI-FORM 1/16, 1/8-27 NPT THREAD MILLING CUTTER, 3 FLUTES
70204
1/16, 1/8-27 - 0.2450" Cutter DIA x 0.4370" (7/16) LOC - 3 FL - AlTiN Coated
HARVEY TOOL
$191.60
0.2450" Cutter DIA x 0.4370" (7/16) Length of Cut Carbide Multi-Form 1/16, 1/8-27 NPTF Thread Milling Cutter, 3 Flutes, AlTiN Coated
784304-C3
1/16, 1/8-27 - 0.2450" CUTTER DIA X 0.4370 (7/16)" LOC - 3 FL - ALTIN COATED, 70204-C3
HARVEY TOOL
$165.20
0.2450" CUTTER DIA X 0.4370 (7/16)" LENGTH OF CUT CARBIDE MULTI-FORM 1/16, 1/8-27 NPT THREAD MILLING CUTTER, 3 FLUTES, ALTIN COATED
70204-C3
1/16, 1/8-27 - 0.2450" CUTTER DIA X 0.4370 (7/16)" LOC - 3 FL - TIB2 COATED, 70204-C8
HARVEY TOOL
$165.80
0.2450" CUTTER DIA X 0.4370 (7/16)" LENGTH OF CUT CARBIDE MULTI-FORM 1/16, 1/8-27 NPT THREAD MILLING CUTTER, 3 FLUTES, TIB2 COATED
70204-C8
1/16 & 1/8-27 NPTF - 0.2450" Cutter DIA x 0.437" (7/16) LOC - 3 FL
MICRO 100
$206.50
0.2450" Cutter DIA x 0.437" (7/16) Length of Cut Carbide Multi-Form 1/16 & 1/8-27 NPTF NPTF Thread Milling Cutter, 3 Flutes
TM-27NPTF
1/16 & 1/8-27 NPTF - 0.2450" Cutter DIA x 0.437" (7/16) LOC - 3 FL - AlTiN Coated
MICRO 100
$210.55
0.2450" Cutter DIA x 0.437" (7/16) Length of Cut Carbide Multi-Form 1/16 & 1/8-27 NPTF NPTF Thread Milling Cutter, 3 Flutes, AlTiN Coated
TM-27NPTFX
1/16 & 1/8-27 NPT - 0.2450" Cutter DIA x 0.437" (7/16) LOC - 3 FL - AlTiN Coated
MICRO 100
$185.95
0.2450" Cutter DIA x 0.437" (7/16) Length of Cut Carbide Multi-Form 1/16 & 1/8-27 NPT NPT Thread Milling Cutter, 3 Flutes, AlTiN Coated
TM-27NPTX
3 FL - 0.0620 (1/16)" CUTTER DIA X 0.4370 (7/16)" LOC, 897962
HARVEY TOOL
$29.80
0.0620 (1/16)" CUTTER DIA X 0.4370 (7/16)" LENGTH OF CUT CARBIDE SQUARE END MILL, 3 FLUTES
897962
3 FL - 0.0620 (1/16)" CUTTER DIA X 0.4370 (7/16)" LOC, 861462
HARVEY TOOL
$34.60
0.0620 (1/16)" CUTTER DIA X 0.4370 (7/16)" LENGTH OF CUT CARBIDE BALL END MILL, 3 FLUTES
861462