HARVEY TOOL
0.6250 (5/8)" CUTTER DIA X 1.6250 (1-5/8)" LOC X 90° INCLUDED - 4 FL, 14340
- SKU:
- 14340
- Shipping:
- Calculated at Checkout
Description
0.6250 (5/8)" CUTTER DIA X 1.6250 (1-5/8)" LENGTH OF CUT X 90° INCLUDED COBALT DRILL/END MILL, 4 FLUTES
View AllClose
Additional Information
Cutter Diameter: |
0.6250" (5/8) |
Length of Cut: |
1.6250" (1-5/8) |
Overall Length: |
3.7500" (3-3/4) |
Angle per Side: |
45 |
Included Angle: |
90 |
Flutes: |
4" |
LOC Multiple: |
(3x) |
Shank Diameter: |
0.6250" (5/8) |
Metric: |
N |
Coating: |
UN |
Related Products
Related Products
0.1250 (1/8)" CUTTER DIA X 0.6250 (5/8)" LOC X 90° INCLUDED - 4 FL, 824008
HARVEY TOOL
$35.30
0.1250 (1/8)" CUTTER DIA X 0.6250 (5/8)" LENGTH OF CUT X 90° INCLUDED CARBIDE DRILL/END MILL, 4 FLUTES
824008
3 FL - 0.6250" (5/8) Cutter DIA x 1.6250" (1-5/8) LOC - Uncoated
TITAN USA
Now:
$118.98
Was:
$132.20
0.6250" (5/8) Cutter DIA x 1.6250" (1-5/8) Length of Cut Carbide Square End Mill for Aluminum Chipbreaker, 3 Flutes, Uncoated
TC67213
0.1718" CUTTER DIA X 0.6250 (5/8)" LOC X 90° INCLUDED - 4 FL, 15311
HARVEY TOOL
$35.60
0.1718" CUTTER DIA X 0.6250 (5/8)" LENGTH OF CUT X 90° INCLUDED CARBIDE DRILL/END MILL, 4 FLUTES
15311
0.2500 (1/4)" CUTTER DIA X 0.6250 (5/8)" LOC X 90° INCLUDED - 4 FL, 14316
HARVEY TOOL
$72.80
0.2500 (1/4)" CUTTER DIA X 0.6250 (5/8)" LENGTH OF CUT X 90° INCLUDED COBALT DRILL/END MILL, 4 FLUTES
14316
0.6250 (5/8)" CUTTER DIA X 1.2500 (1-1/4)" LOC X 90° INCLUDED - 4 FL, 15340
HARVEY TOOL
$144.10
0.6250 (5/8)" CUTTER DIA X 1.2500 (1-1/4)" LENGTH OF CUT X 90° INCLUDED CARBIDE DRILL/END MILL, 4 FLUTES
15340
3 FL - 0.6250" (5/8) Cutter DIA x 1.6250" (1-5/8) LOC - ZrN Coated
TITAN USA
Now:
$134.10
Was:
$149.00
0.6250" (5/8) Cutter DIA x 1.6250" (1-5/8) Length of Cut Carbide Square End Mill for Aluminum Chipbreaker, 3 Flutes, ZrN Coated
TC67238
0.7500 (3/4)" CUTTER DIA X 1.6250 (1-5/8)" LOC X 90° INCLUDED - 4 FL, 14348
HARVEY TOOL
$147.80
0.7500 (3/4)" CUTTER DIA X 1.6250 (1-5/8)" LENGTH OF CUT X 90° INCLUDED COBALT DRILL/END MILL, 4 FLUTES
14348
0.6250 (5/8)" CUTTER DIA X 1.2500 (1-1/4)" LOC X 90° INCLUDED - 2 FL, 46540
HARVEY TOOL
$155.10
0.6250 (5/8)" CUTTER DIA X 1.2500 (1-1/4)" LENGTH OF CUT X 90° INCLUDED CARBIDE DRILL/END MILL, 2 FLUTES
46540
3 FL - 0.6250" (5/8) Cutter DIA x 0.0400" Radius x 1.6250" (1-5/8) LOC - Uncoated
TITAN USA
Now:
$127.22
Was:
$141.35
0.6250" (5/8) Cutter DIA x 0.0400" Radius x 1.6250" (1-5/8) Length of Cut Carbide Corner Radius End Mill for Aluminum Chipbreaker, 3 Flutes, Uncoated
TC67304