TITAN USA
0.3125" (5/16) Shank DIA x 120° Included Angle x 2.5000" (2-1/2) Overall Length X 0.0600" Tip DIA Carbide Tipped Off Chamfer Mill, 2 Flutes, AlTiN Coated
- SKU:
- TC87712
- MPN:
- TC87712
- Shipping:
- Calculated at Checkout
Description
0.3125" (5/16) Shank DIA x 120° Included Angle x 2.5000" (2-1/2) Overall Length X 0.0600" Tip DIA Carbide Tipped Off Chamfer Mill, 2 Flutes, AlTiN Coated
View AllClose
Additional Information
Coating: |
ALTIN |
Cutter Diameter: |
0.3125 (5/16) |
Tip: |
0.06 |
Flutes: |
2 |
Length of Cut: |
0.073 |
Shank Diameter: |
0.3125 (5/16) |
Theoretical Tip Length: |
0.017 |
Included Angle: |
120 |
Overall Length: |
2.5000 (2-1/2) |
Angle per Side: |
60 |
Substrate: |
carbide |
Metric: |
N |
Related Products
Related Products
0.3125" (5/16) Shank DIA x 120° Included Angle x 2.5000" (2-1/2) Overall Length X 0.0600" Tip DIA Carbide Tipped Off Chamfer Mill, 4 Flutes, AlTiN Coated
TITAN USA
Now:
$34.83
Was:
$38.70
0.3125" (5/16) Shank DIA x 120° Included Angle x 2.5000" (2-1/2) Overall Length X 0.0600" Tip DIA Carbide Tipped Off Chamfer Mill, 4 Flutes, AlTiN Coated
TC87832
0.3125" (5/16) Shank DIA x 100° Included Angle x 2.5000" (2-1/2) Overall Length X 0.0600" Tip DIA Carbide Tipped Off Chamfer Mill, 2 Flutes, AlTiN Coated
TITAN USA
Now:
$34.83
Was:
$38.70
0.3125" (5/16) Shank DIA x 100° Included Angle x 2.5000" (2-1/2) Overall Length X 0.0600" Tip DIA Carbide Tipped Off Chamfer Mill, 2 Flutes, AlTiN Coated
TC87700
0.3125" (5/16) Shank DIA x 82° Included Angle x 2.5000" (2-1/2) Overall Length X 0.0600" Tip DIA Carbide Tipped Off Chamfer Mill, 2 Flutes, AlTiN Coated
TITAN USA
Now:
$34.83
Was:
$38.70
0.3125" (5/16) Shank DIA x 82° Included Angle x 2.5000" (2-1/2) Overall Length X 0.0600" Tip DIA Carbide Tipped Off Chamfer Mill, 2 Flutes, AlTiN Coated
TC87676
0.3125" (5/16) Shank DIA x 60° Included Angle x 2.5000" (2-1/2) Overall Length X 0.0600" Tip DIA Carbide Tipped Off Chamfer Mill, 2 Flutes, AlTiN Coated
TITAN USA
Now:
$34.83
Was:
$38.70
0.3125" (5/16) Shank DIA x 60° Included Angle x 2.5000" (2-1/2) Overall Length X 0.0600" Tip DIA Carbide Tipped Off Chamfer Mill, 2 Flutes, AlTiN Coated
TC87664
0.3125" (5/16) Shank DIA x 90° Included Angle x 2.5000" (2-1/2) Overall Length X 0.0600" Tip DIA Carbide Tipped Off Chamfer Mill, 2 Flutes, AlTiN Coated
TITAN USA
Now:
$34.83
Was:
$38.70
0.3125" (5/16) Shank DIA x 90° Included Angle x 2.5000" (2-1/2) Overall Length X 0.0600" Tip DIA Carbide Tipped Off Chamfer Mill, 2 Flutes, AlTiN Coated
TC87688