HARVEY TOOL
0.2500 (1/4)" SHANK DIA X 40° INCLUDED - 1 FL, 25130
- SKU:
- 25130
- Shipping:
- Calculated at Checkout
Additional Information
Length of Cut: |
0.3430" (11/32) |
Overall Length: |
2.5000" (2-1/2) |
Angle per Side: |
20 |
Included Angle: |
40 |
Flutes: |
1" |
Type: |
II |
Split Length: |
0.3750" (3/8) |
Shank Diameter: |
0.2500" (1/4) |
Metric: |
N |
Coating: |
UN |
Related Products
Related Products
0.2500 (1/4)" SHANK DIA X 40° INCLUDED - 1 FL - ALTIN COATED, 25130-C3
HARVEY TOOL
$36.10
0.2500 (1/4)" SHANK DIA X 40° INCLUDED CARBIDE POINTED ENGRAVER, 1 FLUTE, ALTIN COATED
25130-C3
0.2500" (1/4) Shank DIA x 40° included
HARVEY TOOL
$45.10
0.2500" (1/4) Shank DIA x 40° included Carbide Pyramid Point Engraver
834020
0.2500 (1/4)" SHANK DIA X 40° INCLUDED DE - 1 FL, 854012
HARVEY TOOL
$46.30
0.2500 (1/4)" SHANK DIA X 40° INCLUDED CARBIDE POINTED ENGRAVER DE, 1 FLUTE
854012
0.2500 (1/4)" SHANK DIA X 40° INCLUDED - 2 FL, 996716
HARVEY TOOL
$40.10
0.2500 (1/4)" SHANK DIA X 40° INCLUDED CARBIDE MARKING CUTTER, 2 FLUTES
996716
0.2500 (1/4)" SHANK DIA X 40° INCLUDED - 2 FL, 995516
HARVEY TOOL
$39.70
0.2500 (1/4)" SHANK DIA X 40° INCLUDED CARBIDE MARKING CUTTER, 2 FLUTES
995516
0.2500 (1/4)" SHANK DIA X 40° INCLUDED - 2 FL, 967420
HARVEY TOOL
$36.60
0.2500 (1/4)" SHANK DIA X 40° INCLUDED CARBIDE MARKING CUTTER FOR NON-FERROUS, 2 FLUTES
967420
0.2500 (1/4)" SHANK DIA X 0.0100" FLAT X 40° INCLUDED - 1 FL, 25330
HARVEY TOOL
$30.10
0.2500 (1/4)" SHANK DIA X 0.0100" FLAT X 40° INCLUDED CARBIDE TIPPED ENGRAVER, 1 FLUTE
25330
0.2500 (1/4)" SHANK DIA X 0.0050" FLAT X 40° INCLUDED - 1 FL, 25328
HARVEY TOOL
$30.10
0.2500 (1/4)" SHANK DIA X 0.0050" FLAT X 40° INCLUDED CARBIDE TIPPED ENGRAVER, 1 FLUTE
25328
0.2500 (1/4)" SHANK DIA X 70° INCLUDED - 1 FL, 937216
HARVEY TOOL
$30.90
0.2500 (1/4)" SHANK DIA X 70° INCLUDED CARBIDE POINTED ENGRAVER, 1 FLUTE
937216