MICRO 100
0.2500" (1/4) Shank DIA x 30° included
- SKU:
- RTC-250-160
- MPN:
- RTC-250-160
- Availability:
- 83
- Shipping:
- Calculated at Checkout
Additional Information
Coating: |
UN |
Flutes: |
1 |
Shank Diameter: |
0.2500" (1/4) |
Offset: |
0.030" |
Angle per Side: |
15 |
Included Angle: |
30 |
Face Dimension: |
0.125" (1/8) |
Overall Length: |
2.50" (2-1/2) |
Split Length: |
0.500" (1/2) |
Metric: |
N |
Related Products
Related Products
Out of stock
0.2500" (1/4) Shank DIA x 30° included DE
MICRO 100
$46.50
0.2500" (1/4) Shank DIA x 30° included Carbide Tipped Engraver DE
RTC-250-260
0.2500 (1/4)" SHANK DIA X 30° INCLUDED, 834015
HARVEY TOOL
$44.70
0.2500 (1/4)" SHANK DIA X 30° INCLUDED CARBIDE PYRAMID POINT ENGRAVER
834015
0.2500" (1/4) Shank DIA x 30° included - AlTiN Coated
MICRO 100
$40.55
0.2500" (1/4) Shank DIA x 30° included Carbide Tipped Engraver, AlTiN Coated
RTC-250-1X
0.2500 (1/4)" SHANK DIA X 30° INCLUDED - 1 FL, 25030
HARVEY TOOL
$26.60
0.2500 (1/4)" SHANK DIA X 30° INCLUDED CARBIDE POINTED ENGRAVER, 1 FLUTE
25030
0.2500" (1/4) Shank DIA x 30° included DE - AlTiN Coated
MICRO 100
$49.75
0.2500" (1/4) Shank DIA x 30° included Carbide Tipped Engraver DE, AlTiN Coated
RTC-250-2X
0.2500 (1/4)" SHANK DIA X 30° INCLUDED - 2 FL, 967415
HARVEY TOOL
$36.00
0.2500 (1/4)" SHANK DIA X 30° INCLUDED CARBIDE MARKING CUTTER FOR NON-FERROUS, 2 FLUTES
967415
0.2500 (1/4)" SHANK DIA X 30° INCLUDED - 2 FL, 923916
HARVEY TOOL
$36.00
0.2500 (1/4)" SHANK DIA X 30° INCLUDED CARBIDE MARKING CUTTER, 2 FLUTES
923916
0.2500" (1/4) Shank DIA x 60° included
MICRO 100
$37.30
0.2500" (1/4) Shank DIA x 60° included Carbide Tipped Engraver
RSC-250-160
0.2500 (1/4)" SHANK DIA X 30° INCLUDED - 2 FL, 996116
HARVEY TOOL
$36.00
0.2500 (1/4)" SHANK DIA X 30° INCLUDED CARBIDE MARKING CUTTER, 2 FLUTES
996116