HARVEY TOOL
0.1875 (3/16)" SHANK DIA X 0.0300" FLAT X 30° INCLUDED - 1 FL, 25224
- SKU:
- 25224
- Shipping:
- Calculated at Checkout
Description
0.1875 (3/16)" SHANK DIA X 0.0300" FLAT X 30° INCLUDED CARBIDE TIPPED ENGRAVER, 1 FLUTE
View AllClose
Additional Information
Length of Cut: |
0.2940" |
Overall Length: |
2.0000" (2) |
Angle per Side: |
15 |
Included Angle: |
30 |
Flutes: |
1" |
Flat on Part: |
0.0300" |
Type: |
II |
Split Length: |
0.3750" (3/8) |
Shank Diameter: |
0.1875" (3/16) |
Metric: |
N |
Coating: |
UN |
Center Cutting: |
N |
Chip Breaker: |
N |
Weldon Flat: |
N |
Related Products
Related Products
0.1875 (3/16)" SHANK DIA X 0.0300" FLAT X 30° INCLUDED - 1 FL - ALTIN COATED, 25224-C3
HARVEY TOOL
$30.40
0.1875 (3/16)" SHANK DIA X 0.0300" FLAT X 30° INCLUDED CARBIDE TIPPED ENGRAVER, 1 FLUTE, ALTIN COATED
25224-C3
0.1875 (3/16)" SHANK DIA X 0.0300" FLAT X 60° INCLUDED - 1 FL, 27620
HARVEY TOOL
$24.60
0.1875 (3/16)" SHANK DIA X 0.0300" FLAT X 60° INCLUDED CARBIDE TIPPED ENGRAVER, 1 FLUTE
27620
0.1875 (3/16)" SHANK DIA X 0.0300" FLAT X 90° INCLUDED - 1 FL, 30326
HARVEY TOOL
$24.60
0.1875 (3/16)" SHANK DIA X 0.0300" FLAT X 90° INCLUDED CARBIDE TIPPED ENGRAVER, 1 FLUTE
30326
0.1875 (3/16)" SHANK DIA X 0.0100" FLAT X 30° INCLUDED - 1 FL, 25220
HARVEY TOOL
$24.60
0.1875 (3/16)" SHANK DIA X 0.0100" FLAT X 30° INCLUDED CARBIDE TIPPED ENGRAVER, 1 FLUTE
25220
0.1875 (3/16)" SHANK DIA X 0.0200" FLAT X 30° INCLUDED - 1 FL, 25226
HARVEY TOOL
$24.60
0.1875 (3/16)" SHANK DIA X 0.0200" FLAT X 30° INCLUDED CARBIDE TIPPED ENGRAVER, 1 FLUTE
25226
0.1875 (3/16)" SHANK DIA X 30° INCLUDED - 1 FL, 25020
HARVEY TOOL
$21.50
0.1875 (3/16)" SHANK DIA X 30° INCLUDED CARBIDE POINTED ENGRAVER, 1 FLUTE
25020
0.1875 (3/16)" SHANK DIA X 0.0300" RADIUS X 0° INCLUDED - 1 FL, 832660
HARVEY TOOL
$29.70
0.1875 (3/16)" SHANK DIA X 0.0300" RADIUS X 0° INCLUDED CARBIDE BALL PARALLEL ENGRAVER, 1 FLUTE
832660
0.1875 (3/16)" SHANK DIA X 0.0300" FLAT X 60° INCLUDED - 1 FL - ALTIN COATED, 27620-C3
HARVEY TOOL
$30.60
0.1875 (3/16)" SHANK DIA X 0.0300" FLAT X 60° INCLUDED CARBIDE TIPPED ENGRAVER, 1 FLUTE, ALTIN COATED
27620-C3
0.1875" (3/16) Shank DIA x 30° included
MICRO 100
$27.20
0.1875" (3/16) Shank DIA x 30° included Carbide Tipped Engraver
RTC-187-1