HARVEY TOOL
0.1250 (1/8)" SHANK DIA X 60° INCLUDED, 842830
- SKU:
- 842830
- Shipping:
- Calculated at Checkout
Additional Information
Length of Cut: |
0.1080" |
Overall Length: |
1.5000" (1-1/2) |
Angle per Side: |
30 |
Included Angle: |
60 |
Shank Diameter: |
0.1250" (1/8) |
Metric: |
N |
Coating: |
UN |
Weldon Flat: |
N |
Related Products
Related Products
0.1250 (1/8)" SHANK DIA X 60° INCLUDED - ALTIN COATED, 842830-C3
HARVEY TOOL
$34.20
0.1250 (1/8)" SHANK DIA X 60° INCLUDED CARBIDE PYRAMID POINT ENGRAVER, ALTIN COATED
842830-C3
0.1250" (1/8) Shank DIA x 60° included
MICRO 100
$23.00
0.1250" (1/8) Shank DIA x 60° included Carbide Tipped Engraver
RSC-125-13
0.1250" (1/8) Shank DIA x 60° included DE
MICRO 100
$31.80
0.1250" (1/8) Shank DIA x 60° included Carbide Tipped Engraver DE
RSC-125-23
0.1250 (1/8)" SHANK DIA X 60° INCLUDED - 1 FL, 30410
HARVEY TOOL
$27.70
0.1250 (1/8)" SHANK DIA X 60° INCLUDED CARBIDE POINTED ENGRAVER, 1 FLUTE
30410
0.1250" (1/8) Shank DIA x 60° included - AlTiN Coated
MICRO 100
$22.75
0.1250" (1/8) Shank DIA x 60° included Carbide Tipped Engraver, AlTiN Coated
RSC-125-1X
0.1250 (1/8)" SHANK DIA X 60° INCLUDED - 1 FL, 30010
HARVEY TOOL
$16.60
0.1250 (1/8)" SHANK DIA X 60° INCLUDED CARBIDE POINTED ENGRAVER, 1 FLUTE
30010
0.1250 (1/8)" SHANK DIA X 60° INCLUDED - 2 FL, 963230
HARVEY TOOL
$20.60
0.1250 (1/8)" SHANK DIA X 60° INCLUDED CARBIDE MARKING CUTTER FOR NON-FERROUS, 2 FLUTES
963230
0.1250 (1/8)" SHANK DIA X 60° INCLUDED - 2 FL, 48308
HARVEY TOOL
$20.60
0.1250 (1/8)" SHANK DIA X 60° INCLUDED CARBIDE MARKING CUTTER, 2 FLUTES
48308
0.1250 (1/8)" SHANK DIA X 60° INCLUDED - 2 FL, 29608
HARVEY TOOL
$20.60
0.1250 (1/8)" SHANK DIA X 60° INCLUDED CARBIDE MARKING CUTTER, 2 FLUTES
29608