HARVEY TOOL
0.1250 (1/8)" SHANK DIA X 40° INCLUDED, 842820
- SKU:
- 842820
- Shipping:
- Calculated at Checkout
Additional Information
Length of Cut: |
0.1720" (11/64) |
Overall Length: |
1.5000" (1-1/2) |
Angle per Side: |
20 |
Included Angle: |
40 |
Shank Diameter: |
0.1250" (1/8) |
Metric: |
N |
Coating: |
UN |
Weldon Flat: |
N |
Related Products
Related Products
0.1250 (1/8)" SHANK DIA X 40° INCLUDED - ALTIN COATED, 842820-C3
HARVEY TOOL
$34.20
0.1250 (1/8)" SHANK DIA X 40° INCLUDED CARBIDE PYRAMID POINT ENGRAVER, ALTIN COATED
842820-C3
0.1250 (1/8)" SHANK DIA X 40° INCLUDED - 1 FL, 25110
HARVEY TOOL
$17.30
0.1250 (1/8)" SHANK DIA X 40° INCLUDED CARBIDE POINTED ENGRAVER, 1 FLUTE
25110
0.1250 (1/8)" SHANK DIA X 40° INCLUDED - 1 FL, 937808
HARVEY TOOL
$29.20
0.1250 (1/8)" SHANK DIA X 40° INCLUDED CARBIDE POINTED ENGRAVER, 1 FLUTE
937808
0.1250 (1/8)" SHANK DIA X 40° INCLUDED - 1 FL, 978608
HARVEY TOOL
$22.70
0.1250 (1/8)" SHANK DIA X 40° INCLUDED CARBIDE POINTED ENGRAVER, 1 FLUTE
978608
0.1250 (1/8)" SHANK DIA X 40° INCLUDED - 2 FL, 993220
HARVEY TOOL
$22.40
0.1250 (1/8)" SHANK DIA X 40° INCLUDED CARBIDE MARKING CUTTER FOR NON-FERROUS, 2 FLUTES
993220
0.1250" (1/8) Shank DIA x 30° included
MICRO 100
$22.60
0.1250" (1/8) Shank DIA x 30° included Carbide Tipped Engraver
RTC-125-13
0.1250 (1/8)" SHANK DIA X 40° INCLUDED - 2 FL, 963220
HARVEY TOOL
$22.40
0.1250 (1/8)" SHANK DIA X 40° INCLUDED CARBIDE MARKING CUTTER FOR NON-FERROUS, 2 FLUTES
963220
0.1250" (1/8) Shank DIA x 90° included
MICRO 100
$26.60
0.1250" (1/8) Shank DIA x 90° included Carbide Tipped Engraver
RNC-125-13
0.1250" (1/8) Shank DIA x 60° included
MICRO 100
$23.00
0.1250" (1/8) Shank DIA x 60° included Carbide Tipped Engraver
RSC-125-13