Additional Information
Length of Cut: |
0.0360" |
Overall Length: |
1.5000" (1-1/2) |
Angle per Side: |
60 |
Included Angle: |
120 |
Shank Diameter: |
0.1250" (1/8) |
Metric: |
N |
Coating: |
UN |
Related Products
Related Products
0.1250" (1/8) Shank DIA x 120° included - AlTiN Coated
HARVEY TOOL
$34.50
0.1250" (1/8) Shank DIA x 120° included Carbide Pyramid Point Engraver, AlTiN Coated
842860-C3
0.1250 (1/8)" SHANK DIA X 120° INCLUDED - 1 FL, 990508
HARVEY TOOL
$16.60
0.1250 (1/8)" SHANK DIA X 120° INCLUDED CARBIDE POINTED ENGRAVER, 1 FLUTE
990508
0.1250 (1/8)" SHANK DIA X 120° INCLUDED - 2 FL, 993260
HARVEY TOOL
$20.60
0.1250 (1/8)" SHANK DIA X 120° INCLUDED CARBIDE MARKING CUTTER FOR NON-FERROUS, 2 FLUTES
993260
0.1250 (1/8)" SHANK DIA X 120° INCLUDED - 2 FL, 23708
HARVEY TOOL
$20.60
0.1250 (1/8)" SHANK DIA X 120° INCLUDED CARBIDE MARKING CUTTER, 2 FLUTES
23708
0.1250 (1/8)" SHANK DIA X 120° INCLUDED - 2 FL, 844808
HARVEY TOOL
$20.60
0.1250 (1/8)" SHANK DIA X 120° INCLUDED CARBIDE MARKING CUTTER, 2 FLUTES
844808
0.1250 (1/8)" SHANK DIA X 120° INCLUDED - 2 FL, 998808
HARVEY TOOL
$21.10
0.1250 (1/8)" SHANK DIA X 120° INCLUDED CARBIDE MARKING CUTTER, 2 FLUTES
998808
0.1250 (1/8)" SHANK DIA X 120° INCLUDED - 2 FL, 963260
HARVEY TOOL
$21.10
0.1250 (1/8)" SHANK DIA X 120° INCLUDED CARBIDE MARKING CUTTER FOR NON-FERROUS, 2 FLUTES
963260
0.1250" (1/8) Shank DIA x 30° included
MICRO 100
$22.60
0.1250" (1/8) Shank DIA x 30° included Carbide Tipped Engraver
RTC-125-13
0.1250" (1/8) Shank DIA x 60° included
MICRO 100
$23.00
0.1250" (1/8) Shank DIA x 60° included Carbide Tipped Engraver
RSC-125-13