HARVEY TOOL
0.1180" (3 mm) Cutter DIA x 60° included - 2 FL
- SKU:
- 995296
- Shipping:
- Calculated at Checkout
Description
0.1180" (3 mm) Cutter DIA x 60° included Carbide Dovetail Cutter, 2 Flutes
View AllClose
Additional Information
Cutter Diameter: |
0.1180" (3 mm) |
Neck Diameter: |
0.0570" |
Length of Cut: |
0.0530" |
Overall Length: |
1.5000" (1-1/2) |
Angle per Side: |
30 |
Included Angle: |
60 |
Flutes: |
2" |
Shank Diameter: |
0.1250" (1/8) |
Metric: |
N |
Coating: |
UN |
Related Products
Related Products
0.1180" (3 mm) Cutter DIA x 60° included - 2 FL - AlTiN Coated
HARVEY TOOL
$86.20
0.1180" (3 mm) Cutter DIA x 60° included Carbide Dovetail Cutter, 2 Flutes, AlTiN Coated
995296-C3
0.1180" (3 mm) Cutter DIA x 0.0100" Radius x 60° included - 2 FL
HARVEY TOOL
$82.50
0.1180" (3 mm) Cutter DIA x 0.0100" Radius x 60° included Carbide Dovetail Cutter, 2 Flutes
16796
0.1180" (3 mm) Cutter DIA x 0.0100" Radius x 60° included - 2 FL - AlTiN Coated
HARVEY TOOL
$88.00
0.1180" (3 mm) Cutter DIA x 0.0100" Radius x 60° included Carbide Dovetail Cutter, 2 Flutes, AlTiN Coated
16796-C3
2 FL - 0.1180 (3 MM)" CUTTER DIA X 0.3540" LOC, 24205
HARVEY TOOL
$32.50
0.1180 (3 MM)" CUTTER DIA X 0.3540" LENGTH OF CUT CARBIDE 45° HELIX SQUARE END MILL, 2 FLUTES
24205
3 FL - 0.1180" (3 mm) Cutter DIA x 0.8400" LOC
HARVEY TOOL
$31.10
0.1180" (3 mm) Cutter DIA x 0.8400" Length of Cut Carbide Square End Mill, 3 Flutes
898005
2 FL - 0.1180 (3 MM)" CUTTER DIA X 0.1770" LOC, 50204
HARVEY TOOL
$16.70
0.1180 (3 MM)" CUTTER DIA X 0.1770" LENGTH OF CUT CARBIDE SQUARE END MILL, 2 FLUTES
50204
2 FL - 0.1180 (3 MM)" CUTTER DIA X 0.3540" LOC, 72118
HARVEY TOOL
$16.50
0.1180 (3 MM)" CUTTER DIA X 0.3540" LENGTH OF CUT CARBIDE SQUARE END MILL, 2 FLUTES
72118
2 FL - 0.1180 (3 MM)" CUTTER DIA X 0.1770" LOC, 50904
HARVEY TOOL
$24.60
0.1180 (3 MM)" CUTTER DIA X 0.1770" LENGTH OF CUT CARBIDE BALL END MILL, 2 FLUTES
50904
2 FL - 0.1180 (3 MM)" CUTTER DIA X 0.3540" LOC, 27905
HARVEY TOOL
$36.90
0.1180 (3 MM)" CUTTER DIA X 0.3540" LENGTH OF CUT CARBIDE 45° HELIX BALL END MILL, 2 FLUTES
27905