MICRO 100
0.0938" Cutter DIA x 0.375" (3/8) LOC x 135° included - 7 RH Teeth, 9 LH Teeth
- SKU:
- RDD-20
- MPN:
- RDD-20
- Availability:
- 24
- Shipping:
- Calculated at Checkout
Description
0.0938" Cutter DIA x 0.375" (3/8) Length of Cut x 135° included Carbide Diamond Cut End Mill, 7 RH Teeth, 9 LH Teeth
View AllClose
Additional Information
Cutter Diameter: |
0.0938" |
Coating: |
UN |
Length of Cut: |
0.375" (3/8) |
Shank Diameter: |
0.1250" (1/8) |
Overall Length: |
1.50" (1-1/2) |
Point Angle: |
135 |
Metric: |
N |
Related Products
Related Products
7 RH Teeth, 9 LH Teeth - 0.0938" Cutter DIA x 0.375" (3/8) LOC
MICRO 100
$16.50
0.0938" Cutter DIA x 0.375" (3/8) Length of Cut Carbide Diamond Cut End Mill, 7 RH Teeth, 9 LH Teeth
RDB-20
7 RH TEETH, 9 LH TEETH - 0.0938" CUTTER DIA X 0.375" (3/8) LOC ,RDC-20
MICRO 100
$16.50
0.0938" CUTTER DIA X 0.375" (3/8) LENGTH OF CUT CARBIDE DIAMOND CUT END MILL, 7 RH TEETH, 9 LH TEETH,RDC-20
RDC-20
Out of stock
0.1250" (1/8) Cutter DIA x 0.500" (1/2) LOC x 135° included - 7 RH Teeth, 9 LH Teeth
MICRO 100
$16.50
0.1250" (1/8) Cutter DIA x 0.500" (1/2) Length of Cut x 135° included Carbide Diamond Cut End Mill, 7 RH Teeth, 9 LH Teeth
RDD-30
Out of stock
0.1875" (3/16) Cutter DIA x 0.625" (5/8) LOC x 135° included - 8 RH Teeth, 10 LH Teeth
MICRO 100
$26.60
0.1875" (3/16) Cutter DIA x 0.625" (5/8) Length of Cut x 135° included Carbide Diamond Cut End Mill, 8 RH Teeth, 10 LH Teeth
RDD-50
0.0930 (3/32)" CUTTER DIA X 0.2790" LOC X 140° INCLUDED - 7 RH TEETH, 9 LH TEETH, 908093
HARVEY TOOL
$48.50
0.0930 (3/32)" CUTTER DIA X 0.2790" LENGTH OF CUT X 140° INCLUDED CARBIDE DIAMOND CUT END MILL, 7 RH TEETH, 9 LH TEETH
908093
7 RH TEETH, 9 LH TEETH - 0.0930 (3/32)" CUTTER DIA X 0.2790" LOC, 798493
HARVEY TOOL
$45.50
0.0930 (3/32)" CUTTER DIA X 0.2790" LENGTH OF CUT CARBIDE DIAMOND CUT END MILL, 7 RH TEETH, 9 LH TEETH
798493
7 RH TEETH, 9 LH TEETH - 0.0930 (3/32)" CUTTER DIA X 0.2790" LOC, 920993
HARVEY TOOL
$45.50
0.0930 (3/32)" CUTTER DIA X 0.2790" LENGTH OF CUT CARBIDE DIAMOND CUT END MILL, 7 RH TEETH, 9 LH TEETH
920993
Out of stock
0.2500" (1/4) Cutter DIA x 0.750" (3/4) LOC x 135° included - 10 RH Teeth, 12 LH Teeth
MICRO 100
$30.20
0.2500" (1/4) Cutter DIA x 0.750" (3/4) Length of Cut x 135° included Carbide Diamond Cut End Mill, 10 RH Teeth, 12 LH Teeth
RDD-70
Out of stock
0.5000" (1/2) Cutter DIA x 1.000" (1) LOC x 135° included - 18 RH Teeth, 20 LH Teeth
MICRO 100
$92.70
0.5000" (1/2) Cutter DIA x 1.000" (1) Length of Cut x 135° included Carbide Diamond Cut End Mill, 18 RH Teeth, 20 LH Teeth
RDD-110